There is a horrible wobbly and the inside of the sprocket is able to move independently of the actual sprocket. Any word on what might have happened for this to happen and also on the scale of 1 to scrap, how terminal is this.
Images below
Picasso 1.8sx - Sprocket Issue
Moderator: RichardW
-
TheOtherPablo
- Posts: 8
- Joined: 20 Oct 2018, 17:22
- x 1
Picasso 1.8sx - Sprocket Issue
I have an issue with one of the Sprockets in the engine.
There is a horrible wobbly and the inside of the sprocket is able to move independently of the actual sprocket. Any word on what might have happened for this to happen and also on the scale of 1 to scrap, how terminal is this.
Images below
There is a horrible wobbly and the inside of the sprocket is able to move independently of the actual sprocket. Any word on what might have happened for this to happen and also on the scale of 1 to scrap, how terminal is this.
Images below
Last edited by TheOtherPablo on 06 Feb 2019, 10:35, edited 1 time in total.
-
TheOtherPablo
- Posts: 8
- Joined: 20 Oct 2018, 17:22
- x 1
Re: Picasso 1.8sx - Sprocket Issue
**cannot seem to upload the images.
Last edited by TheOtherPablo on 06 Feb 2019, 10:38, edited 1 time in total.
-
TheOtherPablo
- Posts: 8
- Joined: 20 Oct 2018, 17:22
- x 1
-
picassodad
- Posts: 251
- Joined: 04 Oct 2018, 14:26
- x 14
Re: Picasso 1.8sx - Sprocket Issue
This is further to the picassodad coil pack thread. The cam belt timing was checked, all good thank god, but this problem was found. Anyone else come across this problem before. Please could admin post the parts exploded view along with part numbers please, greatly appreciated.