Lambda sensors torques?

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.
alexfisher
Posts: 47
Joined: 21 Jun 2013, 13:28
x 3

Lambda sensors torques?

Unread post by alexfisher »

Hi All, I'm replacing upstream and downstream Lambda sensors on my petrol 1.4 206. No info in the Haynes manual on:

1) Refitting torques?
2) Thread lubrication - Copperease maybe?

Never done them before so any other tips greatly appreciated , thanks - Alex.
Top
User avatar
GiveMeABreak
(Donor 2016)
Posts: 42019
Joined: 15 Sep 2015, 19:38
x 6955

Re: Lambda sensors torques?

Unread post by GiveMeABreak »

Ill see if I have the info and will post later Alex.
Please note, I'm no longer active on the Forum, so won't respond to messages.

Marc
Top
alexfisher
Posts: 47
Joined: 21 Jun 2013, 13:28
x 3

Re: Lambda sensors torques?

Unread post by alexfisher »

Very much appreciated - thanks Marc.
Top
User avatar
GiveMeABreak
(Donor 2016)
Posts: 42019
Joined: 15 Sep 2015, 19:38
x 6955

Re: Lambda sensors torques?

Unread post by GiveMeABreak »

Having had a good look through - I have to report zilch on the torque settings for the Lambda sensors, but the part number for one of them (1628NY) is stated as 45Nm or 4.5 daNm for a BERU cable. Hope that helps!
Please note, I'm no longer active on the Forum, so won't respond to messages.

Marc
Top
alexfisher
Posts: 47
Joined: 21 Jun 2013, 13:28
x 3

Re: Lambda sensors torques?

Unread post by alexfisher »

Great, they went back in fine, thanks again Marc - Alex.
Top

Return to “Peugeot”