ESOS valves - 2.1TD

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
froglet
Posts: 25
Joined: 26 Nov 2012, 14:12
Location:
My Cars:

ESOS valves - 2.1TD

Post by froglet »

Hi again,
Just done another change and still quids-in
However, the screws are becoming increasingly graunched - to the point I have had to saw slots on some (in situ) to get a screw-driver onto them. Not the easiest of tasks for the bottom 2 pairs!
Before my next change, does anyone know the length of the securing screws for the esos body to pump body. I am guessing 4mm diameter thread but ... accurate length so I can order replacements.
I KNOW I should have measured them whilst off but I do not trust my tape measure (or, I got so carried away with getting them back together before I bled to death from my fingers).
Good source for the rings is 'simplybearings.co.uk' who are happy to post abroad.
Also, any torque settings for said screws would be more than welcome.
Post Reply