I have a hubcentric spacer which is 73mm going to the hub wheel. But it needs a spigot at 76mm to fit properly to the wheel.
So how do I go about getting the right one 74mm spigot to fit on hubcentric 73mm then spigot to 76mm?
Thanks
Spacers and spigot rings
Moderator: RichardW
- Welshy_Pete
- Posts: 414
- Joined: 29 Apr 2012, 01:56
- Location: Wrexham Wales
- My Cars: 306 hdi 1999 + 306 hdi 2000
- x 2