Repair for Hateful Xantia Lock Button
Moderator: RichardW
-
- Posts: 180
- Joined: 22 Feb 2005, 02:07
- x 32
Repair for Hateful Xantia Lock Button
When the tab on a door lock button broke despite considerable care, I investigated a bodge to jam the two parts back. In my assorted paper clip box, I found item 1, used by scribes and shysters to clip pages of writs together. To experiment, I cut off a length of the strip. It turned out to be thin enough to slide between the button and the inner plastic piece. The material is pretty soft, and I bent up the clip shown in 2 with a view to getting dimensions for a better version in something more springy.
You can see in 3 how it clips on, and it is completely retained when assembled into the main part of the button. When I tried it, it turned out to have just enough spring to work. I fitted it to the car, see 4, and it seems secure. It would be possible to bend it out a bit more with a watchmaker’s screwdriver if you want to be quite sure.
It works just like the original tab, but it is much more straightforward to remove the button when necessary.
Fred
-
Online
- A very naughty boy
- Posts: 49676
- Joined: 30 Apr 2005, 23:33
- x 6214
Re: Repair for Hateful Xantia Lock Button
Fred, that's excellent!
Jim
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
-
- Posts: 180
- Joined: 22 Feb 2005, 02:07
- x 32
Re: Repair for Hateful Xantia Lock Button
I should have added that the strip is 0.3mm thick and 2.9mm wide (3mm would be fine). I did not measure the final length, but it is less than 20mm. The clip I used has a pointed end, but both ends square would obviously be OK.
Fred
Fred
-
- Posts: 13
- Joined: 11 Sep 2012, 10:53
- x 2
Re: Repair for Hateful Xantia Lock Button
I've only just come across this thread, but have been able to follow the repair for a lock button on my Series II XM.....and it has been a big success.
Thank you Fred. You have saved me about £8.00 for a new button.
Thank you Fred. You have saved me about £8.00 for a new button.
2009 C6 2.2 Hdi Exclusive Gris Fulminator
1999 XM 2.0 TCT Balmoral Blue Nacre
1987 2CV6 Rouge Vallelunga
1979 2CV Fourgonette (by Villevans) Cormoran Gris
1981 Midas Silver
1972 D Special Black (gone but not forgotten)
1999 XM 2.0 TCT Balmoral Blue Nacre
1987 2CV6 Rouge Vallelunga
1979 2CV Fourgonette (by Villevans) Cormoran Gris
1981 Midas Silver
1972 D Special Black (gone but not forgotten)
-
- Donor 2023
- Posts: 1818
- Joined: 22 Nov 2004, 00:21
- x 81
Re: Repair for Hateful Xantia Lock Button
Genius!
I'll be using that VERY soon unless anyone has some kicking around and intact?
I'll be using that VERY soon unless anyone has some kicking around and intact?
-
- (Donor 2016)
- Posts: 10452
- Joined: 28 Mar 2013, 21:05
- x 1303
Re: Repair for Hateful Xantia Lock Button
Very good.....I will be another one to do this....fantastic !
Alasdair
Activa, the Moose Rider
3x C5x7 Steering racks and counting
Activa, the Moose Rider
3x C5x7 Steering racks and counting