S2 HDi Bottom Suspension Arm Bush

This is the Forum for all your Citroen Technical Questions, Problems or Advice.
citroenxm
Fallen Hero
Posts: 8061
Joined: 30 Dec 2004, 23:10
x 70

S2 HDi Bottom Suspension Arm Bush

Unread post by citroenxm »

Hi All,

Does any one know if the bottom arm P Bush is available on its own to fit an arm??? Flea bay only seem to list the arm complete for £100 Plus EACH SIDE! :shock:

I need to do both on a car thats come in part exchange...

The Next Q is, are they heated on, or do they just push on??

Thanks
Paul
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project

A very sad...
1994 XM 2.1 d auto
Top
citronut
Posts: 10937
Joined: 29 Apr 2005, 00:46
x 94

Re: S2 HDi Bottom Suspension Arm Bush

Unread post by citronut »

Paul
i have looked at several MK1 and 2 Xants on service citroen
and the only one out of the modles i checked that shows the P bush on its own are the 90 and 110 HDI's, also it doesnt show any HDI's under MK1at all, but only MK2's,

and they both use the same bush but are handed
part No.'s
left 3523.81
right 3523.82

you should be able to have these No.'s crossed over to pattern No.'s,

hope this helps

also they are an interfearance fit so require driftting on in the same way all the other P bush's do,

regards malcolm
Top

Return to “Citroën”