Xantia TD, Front Height corrector replacement (S1)

This is the Forum for all your Citroen Technical Questions, Problems or Advice.
User avatar
gadgetgricey
Posts: 327
Joined: 29 Jun 2006, 22:21

Xantia TD, Front Height corrector replacement (S1)

Unread post by gadgetgricey »

Easy or Hard to do.

Basically mine has seized and also snapped the connecting rod, that fixes to the bracket on the anti roll bar.

Bit annoyed as went into the garage to get this fixed and they just lubed it up and also said the dog bone was also coming off. New dog bone sourced and taken back to find the above.

Also placed a request in the parts required thread as per above.

Thanks

- Dave -
C8 - Petrol Auto (Love the electronic doors)
Xantia Hdi Exclusive Estate (gone but not forgotten)
Top
jgra1
(Donor 2021)
Posts: 4625
Joined: 27 Nov 2005, 19:07
x 36

Unread post by jgra1 »

hi Dave, think the dog bone coming off is indicative of the seized corrector linakge..

I have not done a front, but should not be too hard.. little more tricky than the back..
plenty here will have done the front one though, they will be along soon : 8-)

john
Top
User avatar
madscientist
Posts: 10
Joined: 13 Jul 2011, 11:28

Xantia Height corrector

Unread post by madscientist »

There's a couple of new Xantia height correctors listed on ebay at the moment.
Xantia HDi SX (2000)
Top
admiral51
(Donor 2026)
Posts: 2681
Joined: 24 May 2007, 10:11
x 391

Unread post by admiral51 »

Hi Dave
Have a good look through the following very informative :)

http://www.frenchcarforum.co.uk/forum/v ... hp?t=27122

Colin
Top

Return to “Citroën”