Xantia Motor Mount - X2 2.0 16V/AL4 - Sasic

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
addo
Sara Watson's Stalker
Posts: 7098
Joined: 19 Aug 2008, 12:38
Location: NEW South Wales, Australia. I'll show you "Far, far away" ;-)
My Cars: Peugeot 605
Citroën Berlingo
Alfa 147
x 93

Xantia Motor Mount - X2 2.0 16V/AL4 - Sasic

Post by addo »

Has anyone here got a good Sasic guide - it appears to be a dealer only thing online?

What I need, is the P/N for the offside upper mount on the above engine/box combination. My original one has collapsed at 142K (that's, say 87K miles). The local suppliers sent me home with four, and said to bring back the three I didn't use. Not sure, however, that any of them is the right one.

Thanks, Adam.
User avatar
CitroJim
A very naughty boy
Posts: 49526
Joined: 30 Apr 2005, 23:33
Location: Paggers
My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
x 6160
Contact:

Post by CitroJim »

Is this of any assistance Adam?

Image

It's from an oldish Laser as Citroen.Service is down at present :(

If it is good, I can look on Citroen.Service later and get an updates.
Jim

Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
addo
Sara Watson's Stalker
Posts: 7098
Joined: 19 Aug 2008, 12:38
Location: NEW South Wales, Australia. I'll show you "Far, far away" ;-)
My Cars: Peugeot 605
Citroën Berlingo
Alfa 147
x 93

Post by addo »

Thanks Jim,

I've demolished parts 7 (lost rear buffer pad), 10 (collapsed) and 11 (oily gel leaked out). :oops: There goes my "drive like a granny" image.

Part 10 I am sure is serviced by Sasic; what I am keen to find is their interchange P/N. Beside me are:
• 8431731
• 8441751
• 8441471
• 8441821

None of these are apparently listed as interchanges, so it may be yet another I don't have here.

Regards, Adam.
Post Reply