Does anyone know the torque wrench setting for the antiroll bar drop link nuts on a 2000 Xantia. Thanks in advance.
Rory
Help with Torque Wrench Setting
Moderator: RichardW
-
- Posts: 715
- Joined: 05 Nov 2001, 19:18
- Location: Leeds, Yorkshire
- My Cars: Xantia Exclusive 110Hdi Estate 1999
- x 1
- CitroJim
- A very naughty boy
- Posts: 49658
- Joined: 30 Apr 2005, 23:33
- Location: Paggers
- My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
- x 6204
- Contact:
Hi Rory,
30 ft lb for M10 nuts and 52 ft lb for M12 nuts according to the BoL..
I don't generall use a torque wrench on these. Just do them up to a sensible tightness. Good and tight with the appropriate ring spanner and they'll be fine...
30 ft lb for M10 nuts and 52 ft lb for M12 nuts according to the BoL..
I don't generall use a torque wrench on these. Just do them up to a sensible tightness. Good and tight with the appropriate ring spanner and they'll be fine...
Jim
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
-
- Posts: 715
- Joined: 05 Nov 2001, 19:18
- Location: Leeds, Yorkshire
- My Cars: Xantia Exclusive 110Hdi Estate 1999
- x 1