xantia heater fan

john alexander · Unread post by **john alexander** » 05 Jan 2008, 20:39

Hi does anyone know the size of replacement brushes for a heater fan motor xantia 1.9td A/C and a supplier many thanks in advance. john.

Unread post by **Peter.N.** » 05 Jan 2008, 22:29

There is a firm on ebay that supplies low voltage brushes but you would have to know the size, so take one out and measure it. Are you shure that the problem is the brushes? I have never known them go, its usually the transistor regulator that gives trouble.

john alexander · Unread post by **john alexander** » 05 Jan 2008, 23:57

Hi peter the motor needs a knock to get it started so I thought it was the brushes , open to all suggestions tho. regards john.

admiral51 · Unread post by **admiral51** » 06 Jan 2008, 00:22

have a look at this thread some pics and a walk through on similar problems
http://www.frenchcarforum.co.uk/forum/v ... sc&start=0

colin