zx hub nut size

weety · Post by **weety** » 30 May 2007, 21:44

i need to do a mates driveshaft on a ZX at the weekend..... i cant find my hub sockets so i need to buy one....i seem to recall they are 32mm anyone know if thats right?

cheers

deian · Post by **deian** » 30 May 2007, 22:21

my xantia is 35mm, could the zx be the same?

Rob_e (UK) · Post by **Rob_e (UK)** » 30 May 2007, 23:09

The BX is 35mm too.

fastandfurryous · Post by **fastandfurryous** » 30 May 2007, 23:10

As is the 405. If I had to guess, I'd say the ZX will be 35mm too.

deian · Post by **deian** » 30 May 2007, 23:33

35mm is not in everyones toolbox either, just because it's an odd (as in odd number) size and bigger than usual... i had to get it from a special shop that sells the weird automotive tool.

rossnunn · Post by **rossnunn** » 31 May 2007, 00:00

yeh pretty sure its 35mm on the diesels - its smaller on the petrols.

Post by **RichardW** » 31 May 2007, 07:49

Yep, 35mm - and it needs to be deep. You can borrow mine if you are near Glasgow

Post by **Peter.N.** » 31 May 2007, 10:25

I bought a complete 3/4" drive socket set in Trago mills for about £25.00. If you dont live in the west country, there must be other places that sell them. I dont very often use it, except for drive shaft and crankshaft pulleys, but I am very pleased that it is there when I need it. Probably what a dealer would charge you to undo it!

weety · Post by **weety** » 01 Jun 2007, 23:35

cheers guys...one large socket and a breaker bar and im all set.......