No power at low revs

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
mark_weaving
Posts: 11
Joined: 30 Jan 2006, 14:48
Location:
My Cars:

No power at low revs

Post by mark_weaving »

Hi guys, I wonder if someone can help me. I've just rebuilt my engine after a cambelt failure, very painfull ( note to self always,always change cambelt). The engine runs roughly at tickover and lacks power until about 3000 rpm after this it runs fine. I need at least 3k rpm just to pull away in 1st gear. Is there something I may of missed during re-assembly, the map sensor is connected. It feels like its running on 3 cyl but I don't know how to check this, in the old days i could just pull of the HT leads one at a time. The model is an R regd Xantia VSX 16v 72K miles. Many Thanks in advance for any advice.
Post Reply