airbag fault in 406 2002

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
monsak
Posts: 22
Joined: 21 Dec 2003, 09:02
Location: Thailand
My Cars:

airbag fault in 406 2002

Post by monsak »

Hi
I use 406 ea9 , my car is 3 years old and about 50000 km. Airbag fault on MFD and airbag light on dsahboard show for 2 month.
I took my car to 2 Peugeot dealers.The first one said that problem is com2000. The second one said that problem is seat belt pretension (not plug under seat, the set of seat belt pretension) on the passenger side. Diag 2000 was used to detected fault and it show this massage "Level of activation driver module 2 , open circrit"
I am looking for any comment.
Thankyou very much
pugxpert
Posts: 281
Joined: 05 Dec 2005, 21:16
Location:
My Cars:

Post by pugxpert »

change com 2000 for that fault.
jonasy
Posts: 46
Joined: 17 Dec 2005, 16:03
Location:
My Cars:

Post by jonasy »

check hairspring under steering wheel
PowerLee
Posts: 1260
Joined: 01 May 2004, 19:49
Location: United Kingdom
My Cars: Current - Slightly modified 2016 Pug 308 Puretech 130 Allure
Past:
2003 - 206 GLX TU3JP & 206 SE ET3JP4
1995 - 405 Executive XU10J2
1996 - 406 GLX XU10J4R
1994 - 405 GTX XU10J2
x 1

Post by PowerLee »

jonasy wrote:check hairspring under steering wheel
That is the dreaded COMM 2000 unit.

All the rotary airbag / horn push wires + the transponder immobiliser aerial & the light & wiper stalk are one big unit called the COMM 2000.
Post Reply