Ok so I have a Xantia Activa well and truly in bits here at the mo and I am taking the entire electrical system and hydraulic system off the car to fit to another car (yes I am that crazy), I’m at the stage ware I am done with the front of the car (I will take a picture of the bare metal from the windscreen onwards later) bar one thing... the engine bay loom, the connectors for it are hidden under the scuttle cover and then another cover on the drivers side of the windscreen /scuttle. How do I separate these connectors? I’ve pulled the yellow tab up and it did nothing.... I know these have to be water proof so what have I missed???
Thanks
(Covered in LHM – I forgot how bad this stuff tastes) Andy
removal of loom help...
Moderator: RichardW
-
ActivaV6uk
- Posts: 650
- Joined: 20 Nov 2003, 16:51
- Location: United Kingdom
- My Cars: C5 X7 2.7 hdi
Past cars
Activa, silver MK1 (221bhp stock) stripped out with twin sparcos Evo seats. 95
Activa, light met red MK1 98
Activa, dark met red MK1 98
Activa, dark met blue MK1 (202bhp stock) 96
Xantia exclusive V6 auto 3l 98
Xantia 2l 8v auto
BX 4x4 GTi dark met silver
BX 4x4 GTi white
BX GTi 16v white fibre bumpers
BX GTi 16v black fibre bumpers
BX GTi 16v hurricane (doa)
BX DTR estate
-
ActivaV6uk
- Posts: 650
- Joined: 20 Nov 2003, 16:51
- Location: United Kingdom
- My Cars: C5 X7 2.7 hdi
Past cars
Activa, silver MK1 (221bhp stock) stripped out with twin sparcos Evo seats. 95
Activa, light met red MK1 98
Activa, dark met red MK1 98
Activa, dark met blue MK1 (202bhp stock) 96
Xantia exclusive V6 auto 3l 98
Xantia 2l 8v auto
BX 4x4 GTi dark met silver
BX 4x4 GTi white
BX GTi 16v white fibre bumpers
BX GTi 16v black fibre bumpers
BX GTi 16v hurricane (doa)
BX DTR estate