2.1 Block - 1.9 Head

HFStuart · Unread post by **HFStuart** » 03 Mar 2005, 03:16

I've read on here that the 2.1 XUD11 is the same or similar block as the 1.9 (I guess the XU bit is a giveaway).
Does anyone have the bore / stroke for the 2.1 ?
When my engine gets hauled out for a recon / replacement it might be a better option than using the big 12v head.
Thanks
Stuart

np · Unread post by np » 03 Mar 2005, 03:22

Bore 85.00mm
Stroke 92.00mm.
Sorry,cant help with the rest.

ActivaV6uk · Unread post by **ActivaV6uk** » 03 Mar 2005, 03:37

I don't think that any of the oil and water holes line up. Nice idea though.
Andy

HFStuart · Unread post by **HFStuart** » 03 Mar 2005, 04:47

Thanks,
So it's a bored & stroked version. I think I'll have a word with Ivor Searle to see if there's an overbore piston available for the 2.1. Providing the compression ratio is workable that would give me 86x88 and about 2050cc or 7 and a bit percent more than standard.
This is all abit speculative but the plan is to see how much more responsive it would be.
Stuart