Xantia ABS
Moderator: RichardW
-
- Posts: 2
- Joined: 15 Aug 2002, 18:14
Xantia ABS
The ABS light on the control panel has suddenly decided to remain on on a 1994 Xantia TD SX. Could this really be a fault with the ABS or could it just be a fault with the sensor? The brakes seem to work the same as before, i.e. the ABS seems to be working fine.
-
- Forum Treasurer
- Posts: 10901
- Joined: 07 Aug 2002, 17:12
- x 1004
If the light is coming on, then the ABS computer has shut off - you will have normal brakes, but the ABS won't activate. Most likely cause is a failed wheel sensor - see other recent threads about solving this. Possible I suppose that the wire to the lamp has chafed through and is causing a short making the light come on.
Richard
Richard
-
- Posts: 1422
- Joined: 24 Jan 2002, 20:11
- x 1
-
- Posts: 712
- Joined: 21 Dec 2001, 15:19
My light would come on randomly, and for the last three weeks had been on all the time.
I checked the terminals on the ECU block at the weekend, and diagnosed a problem with the front right sensor.
On Monday, during heavy braking, some WD40 / Grease that was around the hub area decided to smoke quite heavily ( although there was NONE on the brakes / pads ) - to the extent that I was looking for a fire extinguisher.
Since then, the ABS has been working perfectly ( including the front right ) !!!
I suppose it saves me ( for the moment ) checking it all out again <g>.
Mat.
I checked the terminals on the ECU block at the weekend, and diagnosed a problem with the front right sensor.
On Monday, during heavy braking, some WD40 / Grease that was around the hub area decided to smoke quite heavily ( although there was NONE on the brakes / pads ) - to the extent that I was looking for a fire extinguisher.
Since then, the ABS has been working perfectly ( including the front right ) !!!
I suppose it saves me ( for the moment ) checking it all out again <g>.
Mat.
-
- Posts: 17
- Joined: 06 Mar 2001, 00:37
-
- Posts: 2
- Joined: 15 Aug 2002, 18:14