Drivers seatbelt doesn't fully retract

This is the Forum for all your Citroen Technical Questions, Problems or Advice.
Stewart(oily)
Posts: 923
Joined: 07 Oct 2005, 16:31
x 35

Re: Drivers seatbelt doesn't fully retract

Unread post by Stewart(oily) »

So I read this thread yesterday and set to with warm water and a bit of stardrops, I let it dry and sprayed the belt with some silicone spray that leaves almost no residue, result, the belt now fully retracts, ten minutes well spent.
BXs since 1993 built 1.9 TZD turbo, got a S2 Xantia estate, brilliant car! 2013, Xantia HDI LX 110 2000 new car with 122,000, l C2 HDI Rusty rocket, C3 Picasso HDI new to me.
User avatar
H4wkeye
(Donor 2022)
Posts: 159
Joined: 06 Apr 2022, 00:15
x 14

Re: Drivers seatbelt doesn't fully retract

Unread post by H4wkeye »

Just to update the thread as well, after close inspection I noticed a ton of gunk in the little area where the seatbelt retracts into. Grabbed my swiss army knife and carefully scraped it all off. Then sprayed some silicone spray on the belt and lo and behold, it flies back like new now!
User avatar
GiveMeABreak
(Donor 2016)
Posts: 41989
Joined: 15 Sep 2015, 19:38
x 6957

Re: Drivers seatbelt doesn't fully retract

Unread post by GiveMeABreak »

Probably some debris in the shoulder level support from all the retracting and not the actual reel housing then.
Please note, I'm no longer active on the Forum, so won't respond to messages.

Marc
User avatar
H4wkeye
(Donor 2022)
Posts: 159
Joined: 06 Apr 2022, 00:15
x 14

Re: Drivers seatbelt doesn't fully retract

Unread post by H4wkeye »

Correct. There was a lot of debris in there which I cleaned and sprayed silicone spray on the belt. Works great now.