AX fitting airco system

Post your Cit/Peu/Ren air conditioning queries or advice.
ekjdm14
(Donor 2020)
Posts: 1877
Joined: 19 Jan 2015, 17:42
x 222

Re: AX fitting airco system

Unread post by ekjdm14 »

Oh yeh, nothing is impossible if you want it enough & it's a good point about the AX being possibly similar to the 106 (and saxo, which appears to be the favoured donor in this case). Also the job may be helped along if the car being converted is LHD, I don't know but I think it may be as the OP is in the Netherlands... What side do they drive on~? lol

I would gather from the OP's "fleet" that they're pretty enamoured with the little Cit and more than likely au fait with the general make-up of the car so I can see it being doable if they want an "AX AC", I do think the primary stumbling block would be the heater box/space, and how efficient the system could be with whatever size evaporator is able to be fitted but it's certainly possible. Just whether it turns out being a worthwhile addition usability-wise is what I'm not 100% on, very interested nonetheless to see where this goes & I wish the OP all the best in their project :)
'95 Xantia LX 1.9D-auto, Black, 118k
'97 306 XS 1.6i, Blaze Yellow, 24k
'96 ZX SX 1.9TD rolling shell, White, 81k
User avatar
jsp
Posts: 327
Joined: 04 Dec 2014, 02:05
x 12

Re: AX fitting airco system

Unread post by jsp »

I have LHD car should be easy to fit.
User avatar
spider
Posts: 3949
Joined: 05 Jan 2010, 14:28
x 77

Re: AX fitting airco system

Unread post by spider »

LHD would be easier as you can then (as already put) 'target' a LHD Saxo or 106 with AC as a donor.

Seems I have to register again to look at Citroen SBox as the Peugeot login credentials are not accepted, something I would of thought they would be.

I was merely going to see if *any* (sold anywhere) AX had AC fitted...
Andy.

91 205D-Turbo, gone but still missed
02 106D, TUD5B, gone but not really missed apart from the MPG
User avatar
jsp
Posts: 327
Joined: 04 Dec 2014, 02:05
x 12

Re: AX fitting airco system

Unread post by jsp »

Thanks all Mine is LHD so will fit.
djoptix
Posts: 54
Joined: 30 Jun 2011, 07:18
x 1

Re: AX fitting airco system

Unread post by djoptix »

The main thing you will need is expletives. Make sure you have all the expletives you will need to hand, and get experienced in using them.
User avatar
jsp
Posts: 327
Joined: 04 Dec 2014, 02:05
x 12

Re: AX fitting airco system

Unread post by jsp »

All the parts you mean?
furriegurrie
Posts: 160
Joined: 07 Dec 2012, 15:21
x 27

Re: AX fitting airco system

Unread post by furriegurrie »

Nope, he means all the swear words you can get your hands on :wink:
User avatar
jsp
Posts: 327
Joined: 04 Dec 2014, 02:05
x 12

Re: AX fitting airco system

Unread post by jsp »

XD Will get from a saxo the parts and looming XD
User avatar
jsp
Posts: 327
Joined: 04 Dec 2014, 02:05
x 12

Re: AX fitting airco system

Unread post by jsp »

I have a LHD car but, I dont the have the wiring diagram of the thermostat.
User avatar
jsp
Posts: 327
Joined: 04 Dec 2014, 02:05
x 12

Re: AX fitting airco system

Unread post by jsp »

Image

Anyone?
User avatar
xantia_v6
Forum Admin Team
Posts: 9520
Joined: 09 Nov 2005, 22:03
x 926

Re: AX fitting airco system

Unread post by xantia_v6 »

That appears to be a controller for the compressor clutch, probably for vehicles with "manual" A/C systems. Which model and year of vehicle did it come from?
User avatar
jsp
Posts: 327
Joined: 04 Dec 2014, 02:05
x 12

Re: AX fitting airco system

Unread post by jsp »

saxo 1997 sanden system. Manual system yes.
User avatar
jsp
Posts: 327
Joined: 04 Dec 2014, 02:05
x 12

Re: AX fitting airco system

Unread post by jsp »

Does anyone has the diagram of the Berlingo 1.9D a/c system?
User avatar
jsp
Posts: 327
Joined: 04 Dec 2014, 02:05
x 12

Re: AX fitting airco system

Unread post by jsp »

So after a few month and 50 calls around seems noone knows it?
User avatar
GiveMeABreak
Forum Admin Team
Posts: 40415
Joined: 15 Sep 2015, 19:38
x 6466

Re: AX fitting airco system

Unread post by GiveMeABreak »

What exactly do you want? Mechanical diagram, electrical diagram???
Please Don't PM Me For Technical Help

Marc