Xantia Issues (Late S1 Petrol)

This is the Forum for all your Citroen Technical Questions, Problems or Advice.
P616VKX
Posts: 128
Joined: 01 Feb 2011, 23:04

Unread post by P616VKX »

So, do I remove the relays and clean up all the connections or just buy new ones?

What goes wrong in the relays? If it's soldering, I don't care as I'll just get the solder fixed... But if they need replacing, I'll just order new ones.

Stu.
B564PLC - Red/Grey Renault 11 GTL 'Premiere'
Top
admiral51
(Donor 2023)
Posts: 2655
Joined: 24 May 2007, 10:11
x 389

Unread post by admiral51 »

Its normally either a feed problem to the relay socket or the terminals on the relays get pitted/burnt.I would give the contacts on the relays and the sockets a good clean and also check for correct voltage/earth at the sockets.

Colin
Top

Return to “Citroën”