TD activa Project update.

Kowalski · Unread post by **Kowalski** » 13 Apr 2005, 14:41

I could be wrong but it looks like it has 3 valves per cylinder with one opening into the swirl chamber.

ActivaV6uk · Unread post by **ActivaV6uk** » 13 Apr 2005, 16:26

you know I was reading this last night befor i wnt to bed.. then i thoght that i had seen a machiened part for the cam (the cam is in a sperate section on the 12v head). so those poctures are the 8v HDI and i have no pictures of the 2.1 head at all! thats just typical i striped the whole thing down cleand and checked it and took no pictures!
Good going that man.
I will leave the pictures of the HDi head up for a couple more hours then remove them!
Andy

Richard Gallagher · Unread post by **Richard Gallagher** » 13 Apr 2005, 20:32

Why not whip off the head (Can't take very long as you are familiar with the job) take a couple of photos and then refit it.
That will be todays helpful suggestion [:D][:D]

paranoid · Unread post by **paranoid** » 13 Apr 2005, 20:48

Would that work when trying to see if the glowplugs glow?[;)]

Kowalski · Unread post by **Kowalski** » 13 Apr 2005, 21:05

No, the camera flash would mean you couldn't see the glow.
You could try it in the dark with the flash turned off.

ActivaV6uk · Unread post by **ActivaV6uk** » 13 Apr 2005, 21:23

LOL actualy the head isnt bolted on firmly yet and I have to oil all the head bolts any way so I may just do that and take the head back off, I cant see that it would cause a problem... pictures of the head comming this weekend!
Andy

rossd · Unread post by **rossd** » 13 Apr 2005, 22:21

Wahey!! [:D]