Xantia plip wanted and how to recode?
-
johntaylor
- Posts: 33
- Joined: 04 Apr 2004, 19:09
Xantia plip wanted and how to recode?
Can you help please? 1995 TD with two button (broken)plip and how to recode the system if I get a replacement? Thanks to all who respond.
-
dnsey
- Posts: 1538
- Joined: 20 Oct 2004, 01:39
- x 19
1. Ensure all doors are unlocked using the key.
2. Press and HOLD the large plip key button while the LED flashes continuously
for 20 seconds. After 20 seconds press the small deadlock button
once while still holding the large button.
3. The LED will stop flashing.
4. Release the large button and the LED will light constantly.
5. Press the large button one time, and the LED will go out.
6. Open the door and hold the Plip key near the Ignition switch, and
press the large plip button one time.
7. Now turn the ignition ON, and wait 10 seconds then turn ignition OFF.
8. After 5 seconds, Plip should now operate.
(From advanced-diagnostics.co.uk)
2. Press and HOLD the large plip key button while the LED flashes continuously
for 20 seconds. After 20 seconds press the small deadlock button
once while still holding the large button.
3. The LED will stop flashing.
4. Release the large button and the LED will light constantly.
5. Press the large button one time, and the LED will go out.
6. Open the door and hold the Plip key near the Ignition switch, and
press the large plip button one time.
7. Now turn the ignition ON, and wait 10 seconds then turn ignition OFF.
8. After 5 seconds, Plip should now operate.
(From advanced-diagnostics.co.uk)