RT6 2.75.c.5 Firmware / Software Download

[Paul-R]

Excellent work.

You may find the answer to the Peugeot logo problem by using MiraScripts. See here viewtopic.php?p=866819#p866819

I will send you a PM about the maps.

[Fredo2b]

Bonjour Paul. J'ai récupéré les liens que vous m'avez transmis, merci. Avec le 2.80 sur clé USB, le système démarre, avec le logo Peugeot. Mais au moment de créer les partitions, ça bugge. J'ai essayé avec une micro SD vierge, une autre formatée mais j'ai toujours le même message "erreur durant le partitionnement". Erreur matérielle ou logicielle, qu'en pensez-vous ?

[Paul-R]

In English please, for the benefit of everyone.

Hello Paul. I got the links you sent me, thank you. With the 2.80 on USB key, the system starts, with the Peugeot logo. But when creating the partitions, it bugs. I tried with a blank micro SD, another formatted one but I still get the same "error during partitioning" message. Hardware or software error, what do you think?

I really don't know. What capacity SD card are you trying to use? Is it formatted in FAT32?

[Fredo2b]

La micro SD est de 8 go. Je l'ai essayé vierge (sans partition) et aussi en la formatant en FAT 32. Le résultat est le même. Quand je regarde dans la micro SD originelle, je constate qu'il y a 3 partitions, 2 en FAT 16 et 1 en FAT 32, la plus importante (où il y a les cartes de navigation). Donc, faut-il vraiment la formater en FAT 32 ?

[Paul-R]

Please. English. You've been asked several times.

The micro SD is 8 GB. I tried it blank (without partition) and also formatting it in FAT 32. The result is the same. When I look in the original micro SD, I see that there are 3 partitions, 2 in FAT 16 and 1 in FAT 32, the most important (where there are navigation maps). So, do you really need to format it in FAT 32?

AFAIK after the SD card has been processed by the firmware installation process there should be three partitions of which only one is readable by Windows and that should be FAT32. So the two partitions in FAT16 are anomalous and I don't know how that happened. I could be wrong and that is correct.

Are you using a Windows machine and not a Mac or Linux machine?

I would use a partition manager of some kind to delete the SD card partitions and then put a single partition on the card. And then format it in FAT32. After that try installing the firmware.

[Fredo2b]

Hello. I unzipped the firmware 2.80 on an 8GB USB key formatted in FAT32. The "system volume information" file has been deleted. I formatted the 8GB micro SD in FAT 32 on a single partition. With the engine running, the process starts normally, namely: 1. Flasher loading 2. Disk check 3. Keep engine running etc Check BootRom version 4. Chek Front Panel version 5. Partitionning the SD
But that's where it crashes. On the screen, I have: ERROR during SD partionning!!! Reboot in 5s
Isn't there a problem formatting the micro SD? because if I understood correctly, the USB key works since the program is read and it's when creating the partitions that it freezes. What do you think? Maybe change the allocation table?

[Paul-R]

I recall that there's something that can be set up wrongly on the USB drive (or maybe it was the SD card?) at a low level. Unfortunately I can't remember what it is or where I've seen it.

Can someone help me out on this at all?