I need to replace the front suspension roll bar links on my 307CC and doing a search for the parts I see a vast number of the correct part available by different manufacturers. For instance:Ridex, Monroe, Delphi, First Line, QH, SKF, TRW, FAI, Borg & Beck Febest, etc. The prices vary from about €9 to €22. There are loads more makers names that I have never heard of. Has anyone noticed this? It makes me wonder which brand has actually earned a good reputation for quality. Are they all made in China and all equally crap or are some brands better than others? Someone who has been in the trade for a few years may well have an opinion that would be worthwhile.
Thanks in advance
Parts advice (general)
-
Expertamateur
- Donor 2024
- Posts: 109
- Joined: 24 Nov 2018, 16:55
- x 24
Parts advice (general)
Absolutely hate modern cars and being ripped off by garages that play parts roulette.
-
PaulC5
- Donor 2024
- Posts: 2463
- Joined: 06 Jun 2023, 15:26
- x 632
Re: Parts advice (general)
For something that costs so little why not get them from a Peugeot dealer unless they charge a lot more.
-
myglaren
- Forum Admin Team
- Posts: 28566
- Joined: 02 Mar 2008, 13:30
- x 5614
Re: Parts advice (general)
Febi Bilstein have a good reputation for drop links, although they are generally among the most expensive.
The big problem here is being certain that you actually get what you are paying for, there are so many fakes on the market now.
SKF and TRW also are very well regarded, but with the same proviso.
The big problem here is being certain that you actually get what you are paying for, there are so many fakes on the market now.
SKF and TRW also are very well regarded, but with the same proviso.
-
Expertamateur
- Donor 2024
- Posts: 109
- Joined: 24 Nov 2018, 16:55
- x 24
Re: Parts advice (general)
Thanks for that. I am aware of those names, particularly with bearings and shocks. Likely a good bet.
Absolutely hate modern cars and being ripped off by garages that play parts roulette.
-
Expertamateur
- Donor 2024
- Posts: 109
- Joined: 24 Nov 2018, 16:55
- x 24
Re: Parts advice (general)
I live in France. The dealers should be made to wear a mask.PaulC5 wrote: 29 Jul 2026, 11:54 For something that costs so little why not get them from a Peugeot dealer unless they charge a lot more.
They charged me over €50 to adjust my headlights. On another occasion they charged almost the same to cut a spare ignition key. (Conventional, not remote) In UK I would just pop in to the nearest motor factors and get trade but that can't be done here. So it has to be mail order from one of the online distributors. So if I have to choose from a long list of options I just thought it would be sensible to pick a brand that had a good reputation. I'm not looking for a particularly critical part so I don't suppose it matters if I buy rubbish. If I had money to burn I would take it to the nearest garage and have someone else do it and not care what junk parts they used.
Absolutely hate modern cars and being ripped off by garages that play parts roulette.
-
RichardW
- Forum Treasurer
- Posts: 12508
- Joined: 07 Aug 2002, 17:12
- x 1456
Re: Parts advice (general)
Aftermarket ones are a bit of lottery, but the dealer ones may not be much better! I like Meyle HD, not that much more expensive, but last a good few years.
Richard W
-
Expertamateur
- Donor 2024
- Posts: 109
- Joined: 24 Nov 2018, 16:55
- x 24
Re: Parts advice (general)
Thanks to all who have replied. I have made note of the brands suggested.
Absolutely hate modern cars and being ripped off by garages that play parts roulette.
-
PaulC5
- Donor 2024
- Posts: 2463
- Joined: 06 Jun 2023, 15:26
- x 632
Re: Parts advice (general)
I found a 12 year old topic on a Peugeot forum and it said dealer ones were almost £30 each so expensive, no idea what they are today but prices never go down. On it Meyle HD were recommended. https://www.peugeotforums.com/threads/3 ... ars.96602/