Tepee with 1.6Hdi 112bhp 240nm Potential Problems?

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.
spaceface
Posts: 26
Joined: 27 Feb 2016, 08:59
x 3

Tepee with 1.6Hdi 112bhp 240nm Potential Problems?

Unread post by spaceface »

Going to look at one of the above tomorrow. Anything good or bad with this engine? Is it a belt with a chain for the camshafts? I've had it suggested the 110bhp engines were fitted with a continental ecu which they considered "a nightmare". Any truth in this or just a grumpy person who had a problem with one?
Thanks
PaulC5
Donor 2024
Posts: 2289
Joined: 06 Jun 2023, 15:26
x 570

Re: Tepee with 1.6Hdi 112bhp 240nm Potential Problems?

Unread post by PaulC5 »

What year and mileage is it ?

We've had a few cars with the 1.6 hdi and had no bother with them.
spaceface
Posts: 26
Joined: 27 Feb 2016, 08:59
x 3

Re: Tepee with 1.6Hdi 112bhp 240nm Potential Problems?

Unread post by spaceface »

2014 100,000
PaulC5
Donor 2024
Posts: 2289
Joined: 06 Jun 2023, 15:26
x 570

Re: Tepee with 1.6Hdi 112bhp 240nm Potential Problems?

Unread post by PaulC5 »

At that sort of mileage whether rounded up or down, it should have had the timing belt replaced at 10 years old in 2024, the exhaust dpf probably replaced or due, the dpf fluid refilled, checks need to be made the turbo is still ok.