306 track rod bent !!!!! how to replace

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Posts: 1
Joined: 01 Sep 2002, 17:42

306 track rod bent !!!!! how to replace

Unread post by wassap »

Hi chaps as above really, went to get the tracking done on my 96 dturbo 306, and discovered the track rod on the pass side to be slightly bent, just wondering if this can be replaced? and how it is done, had a look at the haynes manual, and it is about as useful as a kick in the proverbials!!! it mentions a dust cover for the inner joint how does this fix on i cant seem to get it to budge??
any tips? any help appreciated

Posts: 1422
Joined: 24 Jan 2002, 21:11
x 1

Unread post by NiSk »

This is for the ZX, but it's basically the same as the 306:
Hope it helps!

Posts: 192
Joined: 18 Apr 2001, 02:09
x 3

Unread post by Dave1 »

Came in handy again NiSK. Hope it is the offside!