Peugeot 307 CC roof control switch

[Meskoo]

The roof control button of the car I bought a week ago is broken. I want to repair it, but it didn’t fit properly in its place. I want to produce a new button with my 3D printer, but I couldn’t find an STL file. Do you have one, or how can I repair it?

[mickthemaverick]

Can you post a picture of the broken button for reference for anyone that may be able to help?

[Meskoo]

Can you post a picture of the broken button for reference for anyone that may be able to help?

I uploaded the photos

[Meskoo]

Can you post a picture of the broken button for reference for anyone that may be able to help?

Do you have the stl file of this piece?

[mickthemaverick]

No I'm afraid not, I haven't got into 3D printing at all, hopefully someone else will be able to help.

[Alejandroxc70]

Bit late, so in case it's still needed, or for anyone who finds this later with the same broken button: I can redraw it in CAD for you, free. I'd need a few measurements to the millimetre: length, width and height of the button, the size and depth of the peg or clip on the underside that goes into the switch, and the wall thickness. Plus a photo from the side and one from underneath, each with a ruler next to it. If angles or curves are tricky to measure, a free 3D scanning app on your phone can help too.

You've got a printer yourself, so once it's drawn you could print it straight away, PETG or ASA would cope best with the heat in the car. Once it fits, I'll put the file online so other 307 CC owners can get it too. Just drop me a PM.