Hello and thanks for adding me to the group.
Could anyone please tell me the type of bag or fluid top up I require for my C4 GP.....
I'll provide the vin number if required.
Many thanks,
Cris
Particulate top up type via vin number
-
GiveMeABreak
- (Donor 2016)
- Posts: 42019
- Joined: 15 Sep 2015, 19:38
- x 6955
Re: Particulate top up type via vin number
Yes, you'll need to do that. Please post your VIN in full without spaces - it will be automatically masked from public view after submitting your post & will only be visible to staff.
Please note, I'm no longer active on the Forum, so won't respond to messages.
Marc
Marc
-
Criptonicus
- Posts: 3
- Joined: 13 Aug 2024, 21:06
Re: Particulate top up type via vin number
Hi,
Thanks for your help.
My VIN is as follows
VF7**************[VIN obfuscated, can be read by forum staff]
Many thanks
Thanks for your help.
My VIN is as follows
VF7**************[VIN obfuscated, can be read by forum staff]
Many thanks
Last edited by myglaren on 14 Aug 2024, 11:58, edited 1 time in total.
Reason: VIN obscured
Reason: VIN obscured
-
GiveMeABreak
- (Donor 2016)
- Posts: 42019
- Joined: 15 Sep 2015, 19:38
- x 6955
Re: Particulate top up type via vin number
Ok, so you require Powerflex Additive and you have a reservoir based system, not a pouch.
You need to refill it with 1 litre minimum, and the additive counter needs to be reset by a professional level diagnostic tool. The actual capacity is just over 2 litres when empty, so you should really only need a litre for a top up.
You need to refill it with 1 litre minimum, and the additive counter needs to be reset by a professional level diagnostic tool. The actual capacity is just over 2 litres when empty, so you should really only need a litre for a top up.
Please note, I'm no longer active on the Forum, so won't respond to messages.
Marc
Marc
-
Criptonicus
- Posts: 3
- Joined: 13 Aug 2024, 21:06
Re: Particulate top up type via vin number
Thanks for the advice