Good afternoon all,
I had my alloy wheels refurbished as they were diamond cut and looked like a rat had a go at them....The place where i took the car ha issues with one of the locking ones and had to get a specialist to remove it. I was advised to get rid of the locking ones and replace them with normal ones. Could you please advise what is the right size for these so i can order them? The car is a Citroen DS5 2012 plate.
Many thanks in advance
Panos
Wheel nuts
-
GiveMeABreak
- (Donor 2016)
- Posts: 42019
- Joined: 15 Sep 2015, 19:38
- x 6955
Re: Wheel nuts
12X125
Please note, I'm no longer active on the Forum, so won't respond to messages.
Marc
Marc
-
Paul-R
- Moderating Team
- Posts: 8959
- Joined: 07 May 2009, 16:24
- x 1855
Re: Wheel nuts
There are two types of wheel bolts for alloy wheels. One uses a 17mm socket and the other uses a 19mm socket. They're interchangeable but if you get the same as already fitted then you won't have to carry two different sockets to undo them.
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson