Suspension Height Reference Values

[C5entusiast]

I know that the reference value for the C5 X7 is 160 at the front and 106 at the rear. Can I then just enter this on Diabox and see if the height changes. It is too high in the front.

[GiveMeABreak]

No that won't work, as the values entered into Diagbox are not height values, they are then calculated internally to provide a value, so you need to undertake the measurement and calculation phase to determine the values to put into Diagbox.

Here is my post with the procedure for 4 Cylinder X7 vehicles:

viewtopic.php?p=559127#p559127