Diesel injection system - bolts torque specification

[C5X7_2_2HDI]

Hello!
I am in the process of checking my diesel injection system due to a leak from injector (2012 C5 X7).
And I was wondering if I could get some torque tightening specifications for my 2.2 HDI engine ( my VIN is VF7**************[VIN obfuscated, can be read by forum staff]).
Any help would be very apprechiated.

[GiveMeABreak]

I'll put a guide up for you shortly.

[GiveMeABreak]

Here you are - it's the full guide for:

C5 X7 DW12C Injector Removal / Refitting

but will have the torque settings for you.

[C5X7_2_2HDI]

Thank you very much Marc!
Hopefully I'll be able to determine the leak on my system now
Take care!

[coolerl]

I'll put a guide up for you shortly.

Hi Marc,
Can you please check if the link in the post is OK.
I tried accessing it and it says that I have no rights to view that topic.

Also, the above procedure would be the correct one for C5 X7 2010, 2.0 HDI with the VIN VF7**************[VIN obfuscated, can be read by forum staff] - engine: 2.0 HDi 163 PEF (DW10CTED4)
If not, can you please help me with the correct tightening torques.

Thanks,
R.

[GiveMeABreak]

Is it just the injector tightening torques? If so they are contained in the guide here:

C5 X7 DW10CTED4 (163) Injector Removal / Refitting

[coolerl]

Is it just the injector tightening torques? If so they are contained in the guide here:

C5 X7 DW10CTED4 (163) Injector Removal / Refitting

Brilliant as always!

Many thanks Marc!