Peugeot 207 1.4hdi engine cut out

[bogdangy]

Hi!I am having some issues with my car,it started one day when I was at a junction,and the engine stopped,eml on and antipollution faulty error!Since then I noticed that everytime the engine reaches the optimum working temperature,it will cut out at traffic lights or junctions when at low revs.If I rev it up over 2000-3000,wont cut out.I changed fuel filter,intake air temp sensor,even bought Lexia 3 to diagnose it.It showed up error code for glow plug relay,P1351,and yesterday put it on diagbox again,2 new codes appeared,P0489 and P1162

[GiveMeABreak]

Pop your VIN up and I'll take a look.

[bogdangy]

VF3**************[VIN obfuscated, can be read by forum staff] Thank you!

[bogdangy]

Anyone?
Today I took out the egr valve to clean it.Put it back,started the engine,rev it up,I noticed it wont go past 3000 rpm,car parked or when driving.Also I tested it to see if the engine will cut out.(this was my initially problem).I could drive the car under 1000 rpm,back and forward,engine didnt cut out.Then I took it for a 20-30 minutes run,when the coolant temp reached 90°(engine warmed up),it cut out at a junction,restarted the engine,this time I could rev it past 3000 rpm,after a couple of minutes it wont get again past 3000!I am just sick about this car.Struggling to fing the issue,spent some money and didnt solve the problem.In the morning took it for a ride and I noticed that the clutch is slipping diagbox found error about egr electric valve alongside the other P0489 and P1162.What should I do?Please help.To buy a new egr?