Citroen, DS Automobiles and Peugeot Official Part Number Requests

[GiveMeABreak]

Her you are Kenny:

(1) Altnernator, Classe 18 Valeo, FG 18 S 027
OEM, Part: 9803750980, £1059.77
Cheaper Alternative, Part: 1648236080, £486.00

Exchange Original, Part: 5702J4, £536.21

[KennyW]

Thanks Marc

[cs101]

Hi, Marc! Please can you give me the part number and price if possible for The complete Pat Fluid tank for my van VIN VF3**************[VIN obfuscated, can be read by forum staff].
Thanks

[wheeler]

Hi, Marc! Please can you give me the part number and price if possible for The complete Pat Fluid tank for my van VIN VF3**************[VIN obfuscated, can be read by forum staff].
Thanks

Part no: 9817154080
Dealer price £241.42 inc VAT

[cs101]

Thanks, wheeler.

[Orchid70]

Hello Marc!
I have a C3 1.1 from 2006 incoming. Indicator problems of some kind (hubby talked to the owner). Seen, that it could be the COM2000, stalk itself. And there are a large variety of them.
My Service is acting up, the drop down menu appears up too far and disappears when I move the curser there. Same in all browsers I have. And this VIN or VIS is not recognized.
I would be thankfull for the correct part number.
VIN: VF7**************[VIN obfuscated, can be read by forum staff]

[GiveMeABreak]

Hi, item (1)

Remember, if you have audio or cruise control stalks, you will need to remove those first and refit them in the new unit. They just snap in and out, but be careful removing them.

No problems, the original part for the control unit under the steering wheel for your vehicle was: 6239ZX (£412.33). However it is no longer available from Citroen, but there is another company providing these, new or reconditioned - you have a choice:

Here's the link:

https://peugeotpartsforsale.com/index.p ... egory_id=0

[c.morewood]

Hi Marc,
I'm looking for the part number (if it exists) of the rubber pipe coming out of the ABS module (RHS looking from the front) and disappearing under the LHM tank bracket on the Mk2 Xantia. (let me know if you need a photo)
VIN VF7**************[VIN obfuscated, can be read by forum staff]
If you can post the pipe routeing diagram that would be greatly appreciated. I can't find it in any of the pipe routeings I printed off a few years ago.
Thanks,
Chris

[GiveMeABreak]

Hi Chris

Not sure which pipe you want so here are the ABS pipes. Let me know which one you need the part for:

Brake Piping

[Rp0thejester]

Got a strange request... I don't have all the parts for a wheel change in the engine bay of my C8 and no towing hook/eye. Are they sold as a set or individual parts?

[xantia_v6]

Hi Chris

Not sure which pipe you want so here are the ABS pipes. Let me know which one you need the part for:

Brake Piping

I think the only rubber hose to the ABS block is the return hose to the LHM reservoir. It would be on the return lines diagram, probably part of a complex harness.

[wheeler]

Got a strange request... I don't have all the parts for a wheel change in the engine bay of my C8 and no towing hook/eye. Are they sold as a set or individual parts?

All Separate parts

[Rp0thejester]

Thanks Wheeler, I need 4 and 8, any idea of prices or is it full set only?

[wheeler]

The towing eye is £23.29 inc VAT
The wheel brace depends on your RP number 671715 was £12.22 but is no longer available 674236 is £31.16 I have no idea why that one is so much more expensive

I reckon under £20 from a breakers, Wouldnt dream of paying that for a wheel brace or towing eye.

The mk 3 Dispatch or Expert use the same towing eye and the mk 1 & 2 Dispatch/Expert use the same wheel braces. May be easier to find in a breakers.

[Rp0thejester]

Okay thanks for that info bud