I have a Peugeot partner 2004 mod who want start
have change the battery
have new diesel filter
is there any reset after change battery ?
Is the any spesial bleeding way to get the air out from pump ?
can the stop imobiliser been damage. if can it been cut of, or check? its named 152A 156-Ax
its a delphi dieselpump on it
2004 peugeot partner 1868
Moderator: RichardW
Re: 2004 peugeot partner 1868
Close the driver's window, raise the hood, and make sure all equipment is turned off.
Close all doors and take the key from the ignition.
Wait 3 minutes, then unplug the car battery for 15 seconds.
Reconnect the car battery and wait 10 seconds (do not open doors.).
Turn on the side lights via the driver's window.
Turn on the ignition and test the system's operation.
Hold the lock button on the key for 10 seconds.
Remove the key, open and close the door, and test the central locking mechanism.
Start the engine and do the system check.
Failure to adhere to this method may result in the erroneous operation of several BSI-related objects.
Close all doors and take the key from the ignition.
Wait 3 minutes, then unplug the car battery for 15 seconds.
Reconnect the car battery and wait 10 seconds (do not open doors.).
Turn on the side lights via the driver's window.
Turn on the ignition and test the system's operation.
Hold the lock button on the key for 10 seconds.
Remove the key, open and close the door, and test the central locking mechanism.
Start the engine and do the system check.
Failure to adhere to this method may result in the erroneous operation of several BSI-related objects.
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: 2004 peugeot partner 1868
1) Use this procedure: BSI Reset / Battery Disconnect / Reconnect ProcedureErikmax wrote: ↑29 May 2022, 17:22 I have a Peugeot partner 2004 mod who want start
have change the battery
have new diesel filter
is there any reset after change battery ?
Is the any spesial bleeding way to get the air out from pump ?
can the stop imobiliser been damage. if can it been cut of, or check? its named 152A 156-Ax
its a delphi dieselpump on it
2) Yes, if you have disabled wiring, or interfered with the pump in any way then this can prevent starting of the vehicle by the engine ECU.
Please Don't PM Me For Technical Help
Marc
Marc