Hydraktiv 3+
Moderator: RichardW
-
C5entusiast
- Posts: 6
- Joined: 16 Feb 2021, 16:10
- Location: Nordfjordeid
- Lexia Available: Yes
- My Cars: 2011 C5 2,0 HDI Exclusive 163 hk berline
Hydraktiv 3+
my car runs in stiff mode at the back sometimes where it also rises after driving over speed bumps. Has changed the regulator valve and height sensor. Anyone have a solution?
-
GiveMeABreak
- Forum Admin Team
- Posts: 37302
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5712
Re: Hydraktiv 3+
If the height sensor was not put back correctly in the exact position (and I mean if the clamp that holds the sensor on the rear axle was moved) then this can result in incorrect height data being sent to the suspension ECU in the BHI.
The only other thing I can think of is the Hydraulic block or there is air in the system.
Try bleeding the system:
The only other thing I can think of is the Hydraulic block or there is air in the system.
Try bleeding the system:
- Start the engine.
- Wait for the vehicle height to stabilise.
- Put the vehicle in the "high" position.
- Lower the vehicle to the low position.
- Turn the steering from lock to lock in each direction several times slowly, but do not hold the steering at each lock.
- Stop the engine.
- Check the LDS fluid level.
Please Don't PM Me For Technical Help
Marc
Marc