Clutch kits
Moderator: RichardW
-
- (Donor 2020)
- Posts: 144
- Joined: 31 Dec 2019, 20:05
- Location: Barnsley
- My Cars: Citroen C5 Estate 2009
- x 13
Clutch kits
Hello all and merry Christmas
General enquiry on luk clutch kits
Is there any difference between the friction plate ,pressure plate and release bearing on a solid mass flywheel compared with a dual mass version ie are they interchangeable components ?
Regards
Steve
General enquiry on luk clutch kits
Is there any difference between the friction plate ,pressure plate and release bearing on a solid mass flywheel compared with a dual mass version ie are they interchangeable components ?
Regards
Steve
- GiveMeABreak
- Forum Admin Team
- Posts: 37014
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5648
Re: Clutch kits
All I can tell you is that the clutches and clutch kits are different depending on the engine it is being fitted to - and as most of the X7 have Dual Mass Flywheels apart from a few early petrol engines, these too are different according to engine. So there's no comparison as there's no single flywheel versions to compare with on a diesel.
Please Don't PM Me For Technical Help
Marc
Marc
-
- (Donor 2020)
- Posts: 144
- Joined: 31 Dec 2019, 20:05
- Location: Barnsley
- My Cars: Citroen C5 Estate 2009
- x 13
Re: Clutch kits
Cheers Marc
I know about the dual mass, I was just wondering if the three parts (not dual mass) are the same for the single mass as well as the dual mass
But if there's nothing to compare against I guess that's it
Thx
Regards
Steve
I know about the dual mass, I was just wondering if the three parts (not dual mass) are the same for the single mass as well as the dual mass
But if there's nothing to compare against I guess that's it
Thx
Regards
Steve
- GiveMeABreak
- Forum Admin Team
- Posts: 37014
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5648
Re: Clutch kits
Yes, that's about the long and short of it
Please Don't PM Me For Technical Help
Marc
Marc
- Paul-R
- Donor 2023
- Posts: 6916
- Joined: 07 May 2009, 16:24
- Location: Wirral, NW England; Vaucluse 84, France
- Lexia Available: Yes
- My Cars: 2015 1.6 Blue HDi 120 Peugeot 308 Active SW
2013 2.0 HDi 163 C5 Exclusive Tourer
2003 2.0 HDi 110 C5 Exclusive Estate (Gone)
2001 2.0 HDi 90 Xsara Estate (Gone) - x 1369
Re: Clutch kits
Theoretically the friction plate at least can't be the same as on a solid flywheel the cush springs are very noticeable. The damping is done within the flywheel on a DMF vehicle and the friction plate is therefore solidly attached to the splined centre.
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
- white exec
- Moderating Team
- Posts: 7445
- Joined: 21 Dec 2015, 12:46
- Location: Sayalonga, Malaga, Spain
- My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S - x 1752
Re: Clutch kits
No, they're not the same type of friction plates.
A DMF friction plate does not incorporate springs - the shock-absorption is in the DMF flywheel.
A traditional or SMF friction plate is sprung, as the flywheel is solid.
You must not mix the two.
A DMF friction plate does not incorporate springs - the shock-absorption is in the DMF flywheel.
A traditional or SMF friction plate is sprung, as the flywheel is solid.
You must not mix the two.
Chris
-
- Donor 2023
- Posts: 13727
- Joined: 01 Apr 2012, 09:47
- Location: Reading
- My Cars: C5 Mk2 VTX+ estate.
- x 2993
Re: Clutch kits
God, can you imagine the driving experience if you did? Sprung plate and DMF might make for a very smooth transfer of power, while a solid plate and SMF might make for a very ABRUPT transfer of power!
Last edited by Hell Razor5543 on 20 Dec 2021, 07:11, edited 1 time in total.
James
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
Ex C5 2.0HDi VTR
Ex C5 2.0HDi VTR
C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
Ex C5 2.0HDi VTR
Ex C5 2.0HDi VTR
C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
- white exec
- Moderating Team
- Posts: 7445
- Joined: 21 Dec 2015, 12:46
- Location: Sayalonga, Malaga, Spain
- My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S - x 1752
Re: Clutch kits
Hill starts with DMF can be less than slick anyway, but can you imaging doing one with a "double twangy" in the drive train?!?
Chris
-
- Moderating Team
- Posts: 11563
- Joined: 02 Apr 2005, 16:11
- Location: Charmouth,Dorset
- My Cars: Currently:
C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red
In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars. - x 1199
Re: Clutch kits
Thank you for all that information, might come in useful in the future.
Peter
Peter
- mickthemaverick
- Donor 2024
- Posts: 13523
- Joined: 11 May 2019, 17:56
- Location: Hertford
- My Cars: 70+ former cars (list available) including 11 Citroens, 3 Renaults
Current cars: 2004 Subaru Legacy 2.5 SEn, 1994 Mazda MX3 - x 6011
Re: Clutch kits
That effect could be enhanced even further by replacing the CV's with the good old rubber doughnuts so loved in the Lotus Elan!!white exec wrote: ↑20 Dec 2021, 06:50 Hill starts with DMF can be less than slick anyway, but can you imaging doing one with a "double twangy" in the drive train?!?
I used to be indecisive, now I'm not so sure!
I used to ride on two wheels, but now I need all four!
I used to ride on two wheels, but now I need all four!
-
- (Donor 2020)
- Posts: 144
- Joined: 31 Dec 2019, 20:05
- Location: Barnsley
- My Cars: Citroen C5 Estate 2009
- x 13
Re: Clutch kits
Cheers guys
I was only asking because we went to Scarborough a few weeks ago after the car had been stood for 14 days do to covid (me not the car) and the clutch was definitely slipping on occasions maybe twice there and once coming back .
This only happened slightly as the revs increased on acceleration the speed didn't increase at the same pace.
However this now seems to have rectified itself
I have tried to accelerate hard going up a long steep hill on numerous occasions in various gears and no slippage has occurred.
Just wondering now if it was because it was stood for the 14 days
Strange
Regards
Steve
Regards
Steve
I was only asking because we went to Scarborough a few weeks ago after the car had been stood for 14 days do to covid (me not the car) and the clutch was definitely slipping on occasions maybe twice there and once coming back .
This only happened slightly as the revs increased on acceleration the speed didn't increase at the same pace.
However this now seems to have rectified itself
I have tried to accelerate hard going up a long steep hill on numerous occasions in various gears and no slippage has occurred.
Just wondering now if it was because it was stood for the 14 days
Strange
Regards
Steve
Regards
Steve
- GiveMeABreak
- Forum Admin Team
- Posts: 37014
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5648
Re: Clutch kits
It’ll be either clutch and or DMF. If it’s started to happen it will get worse. You’ll notice it more when putting the power on when in 5th or 6th gear.
Be prepared to have both replaced at about a grand. If the DMF is on the way out, be wary as it will run the risk of breaking up and causing periphery damage if allowed to do so.
When mine started slipping, it started off just occasionally, but got more noticeable quite quickly after. Not long after I had them both replaced, (and I did see the worn DMF and clutch), I started getting slipping again after about 11k miles. Turned out the second slipping issue was the crankcase oil seal had gone, leading to oil on the clutch.
Had to have the clutch replaced again which I paid for, but the labour for the job was covered under extended warranty.
Be prepared to have both replaced at about a grand. If the DMF is on the way out, be wary as it will run the risk of breaking up and causing periphery damage if allowed to do so.
When mine started slipping, it started off just occasionally, but got more noticeable quite quickly after. Not long after I had them both replaced, (and I did see the worn DMF and clutch), I started getting slipping again after about 11k miles. Turned out the second slipping issue was the crankcase oil seal had gone, leading to oil on the clutch.
Had to have the clutch replaced again which I paid for, but the labour for the job was covered under extended warranty.
Please Don't PM Me For Technical Help
Marc
Marc
-
- (Donor 2020)
- Posts: 144
- Joined: 31 Dec 2019, 20:05
- Location: Barnsley
- My Cars: Citroen C5 Estate 2009
- x 13
Re: Clutch kits
Cheers Marc what mileage was on the car at the time ?
Steve
Steve
- bobins
- Donor 2023
- Posts: 5697
- Joined: 05 Jul 2012, 18:07
- Location: Midhurst, West Sussex
- My Cars: Kia Sportage
Mazda BT-50
Land Rover SIII SWB
V-F-R800
SL320
MX5 - x 2871
Re: Clutch kits
The auto adjusting clutch on these is known to be a bit rubbish at auto adjusting. It can mostly be pursuaded to auto adjust if you give it a bit of high revving abuse in 1st / 2nd / 3rd and by doing some harsh downchanges. This in addition to the rubbish DMFs and leaky crankshaft oil seals that some come factory fitted with.
Mine has been leaking for a few years now - I just keep an eye on it, and it has also been slipping due to the auto-adjust being lazy for many years now.
Mine has been leaking for a few years now - I just keep an eye on it, and it has also been slipping due to the auto-adjust being lazy for many years now.
Sadly no longer a C5 owner
-
- (Donor 2020)
- Posts: 144
- Joined: 31 Dec 2019, 20:05
- Location: Barnsley
- My Cars: Citroen C5 Estate 2009
- x 13
Re: Clutch kits
Hi
Thank you
Appreciated
Regards
Steve
Thank you
Appreciated
Regards
Steve