Simon's new Xantia V6 and Leaf blog

Tell us your ongoing tales and experiences with your French car here. Post pictures of your car here as well.

Moderators: RichardW, myglaren

User avatar
GiveMeABreak
Forum Admin Team
Posts: 26053
Joined: 15 Sep 2015, 19:38
x 2989

Re: Simon's new Xantia V6 and Leaf blog

Post by GiveMeABreak »

Understandable where there isn't a dealer Simon. Just mentioned it on a price basis alone.
User avatar
white exec
Moderating Team
Posts: 7384
Joined: 21 Dec 2015, 13:46
x 1446

Re: Simon's new Xantia V6 and Leaf blog

Post by white exec »

Citroen/Servicebox Parts usually lists the size of component O-rings.
Polymax (in Bordon, Hants) stock thousands of sizes and types, and dispatch quickly.
Adding 0.2mm to the OE thickness of PSA O-rings is often a smart move, as PSA tend to be skimpy of O-ring dimensions.
As they're so cheap, worth adding a few sizes either side just in case, and upping the qty too (in case a pair is needed for the matrix joints).
RichardW
Forum Treasurer
Posts: 9652
Joined: 07 Aug 2002, 17:12
x 493

Re: Simon's new Xantia V6 and Leaf blog

Post by RichardW »

Size not given in this case - I didn't check, just assumed that this would not be available anymore, but it seems to be!
User avatar
Mandrake
Posts: 8438
Joined: 10 Apr 2005, 17:23
x 423

Re: Simon's new Xantia V6 and Leaf blog

Post by Mandrake »

RichardW wrote:
08 Nov 2021, 20:10
Size not given in this case - I didn't check, just assumed that this would not be available anymore, but it seems to be!
I'd already read that this part is not available from Citroen anymore and didn't check as I don't have access to service Citroen anymore.

With an easily replaced part I would be willing to wander off the reservation and fit appropriate size 3rd party seals, but (a) I'd have to get the old ones out to measure them first before ordering, which adds considerable delay with the car in pieces, (b) I can't think of a worse job to have to do a second time if it doesn't quite seal properly! #-o
User avatar
Mandrake
Posts: 8438
Joined: 10 Apr 2005, 17:23
x 423

Re: Simon's new Xantia V6 and Leaf blog

Post by Mandrake »

An update on the heater matrix - I've had no time to work on this lately anyway, but one set of seals from endon services arrived fairly quickly and I can confirm that 2x the seal part number actually does only get you two seals even though they come two to a bag.

The other seals from Tomo motorparts are MIA with no correspondence since the order confirmation email on the 8th so I'm chasing them up now.

I went back to Chevronics to look at ordering the matrix today £55.20 for a Valeo matrix but they want £32.54 for shipping from England to Scotland! Eh, no! :x

I guess I'll have to look elsewhere as I'm not paying near on £90 for this heater matrix including over £30 shipping.

Autodoc list lots of heater matrixes for the Xantia at a much lower cost but some don't stipulate whether they're for left or right hand drive - does anyone know the original OEM part number for the RHD S1 Xantia V6 heater matrix so I can cross check them properly ?

https://www.autodoc.co.uk/car-parts/hea ... -3-0-i-24v

Cross checking to make sure I'm getting the right one seems to be a bit of a minefield as there are so many original OEM numbers listed for these different matrixes!
User avatar
xantia_v6
Forum Admin Team
Posts: 7908
Joined: 09 Nov 2005, 23:03
x 512

Re: Simon's new Xantia V6 and Leaf blog

Post by xantia_v6 »

I would be a little surprised if RHD / LHD matrices differed, as they sit in the centre of the car and the air flow is vertical.
User avatar
Mandrake
Posts: 8438
Joined: 10 Apr 2005, 17:23
x 423

Re: Simon's new Xantia V6 and Leaf blog

Post by Mandrake »

Some of the matrixes listed say for left hand drive car and some say for right hand drive cars. Presumably the pipes come in on opposite sides. I don’t intend to find out the hard way anyway.
User avatar
mickthemaverick
Donor 2021
Posts: 7381
Joined: 11 May 2019, 17:56
x 2093

Re: Simon's new Xantia V6 and Leaf blog

Post by mickthemaverick »

If you don't have any luck Simon I'll be happy to pop up to Chevronics and collect it for despatch by Hermes courier from my local drop off point. Did a quick guess the dimensions, I put 60x40x15cm and 4kg weight, quote from Hertford to Glasgow and it was around £9. Just an option!! :)
RichardW
Forum Treasurer
Posts: 9652
Joined: 07 Aug 2002, 17:12
x 493

Re: Simon's new Xantia V6 and Leaf blog

Post by RichardW »

There are different matrixes for LHD and RHD cars - by the looks of it if you laid the matrix down with the ports pointing up, then RHD they would be at 2 o'clock and LHD at 10 o'clock. RHD is 644880 (all models, Mk1 and 2), LHD is 644878 (Valeo) and 6448C8 (Behr).

Also used on MK 1 / 2 Berling, Mk 1 / 2 Xsara and ZX, and Pug 306 and Partner Mk 1 / 2 which might open more avenues!

Under £20: https://www.ebay.co.uk/itm/292385946042 ... SwjkVeTV-r
User avatar
Mandrake
Posts: 8438
Joined: 10 Apr 2005, 17:23
x 423

Re: Simon's new Xantia V6 and Leaf blog

Post by Mandrake »

Thanks Richard! 644880 is what I needed to know. :)

While I like to support specialists like Chevronics, £55 odd with another £30 on top for shipping is way over the top. :roll:

Autodoc also have a number of matrix's around the £15-£30 range and charge about £6 for delivery so I'll have a sift through those as well now I have an OEM reference number to be sure I'm getting the right thing.

Ordering from the EU from companies like Autodoc always carries the risk of getting LHD versions of components because they are not always clearly labled as such! (I've been caught out before, especially with parts that say drivers side or passenger side and you have to second guess if they have switched these around for the UK version of their site... the only way to be sure is to cross reference yourself with the OEM part number)
Dormouse
Donor 2021
Posts: 1066
Joined: 15 Apr 2021, 14:32
x 237

Re: Simon's new Xantia V6 and Leaf blog

Post by Dormouse »

I make a point of asking for right and left when ordering from Europe and agree that LHD parts can be different from RHD. All the more reason to double check. But, price savings are there for the finding.