hi there.
the car dont have CPH unit.(no immobilizer)
how can i control door locks specially boot door lock from inside of car with switch?
xantia door locking system
Moderator: RichardW
Re: xantia door locking system
update:
the boot door lock actuator motor have 2 wire with 6218 and 6208 codes that goes to pin 8 and pin 14 of CPH bigger connector.
by applying 12 volts its locking/unlocking
the boot door lock actuator motor have 2 wire with 6218 and 6208 codes that goes to pin 8 and pin 14 of CPH bigger connector.
by applying 12 volts its locking/unlocking
Re: xantia door locking system
update 2:
the wires with 6218 and 6208 codes that goes to pin 8 and pin 14 of CPH bigger connector, controls all of doors and boot Locks.
but be careful to not burn or damage Locks motors and their plastic gears by applying voltage for too long.(1sec will do the job)
the wires with 6218 and 6208 codes that goes to pin 8 and pin 14 of CPH bigger connector, controls all of doors and boot Locks.
but be careful to not burn or damage Locks motors and their plastic gears by applying voltage for too long.(1sec will do the job)