My zx estate
Moderator: RichardW
- Huskyxantia
- Donor 2023
- Posts: 1939
- Joined: 30 Jul 2018, 22:11
- Location: Surrey Kent sussex border
- My Cars: Past cars
Xsara Picasso 2019 to 2022 r.i.p
Xantia mk1&2 1.9D & 2.0Hdi
Peugeot 206 sw 1.4hdi
Other models
Skoda fabia,escort van,ford ka,Vauxhall astra g car & estate, Vauxhall corsa b, Suzuki swift
Escorts mk 1,2,3,4,5 fiestas mk 1,2, Sierra diesel mk1 Mondeo mk1 diesel .
Peugeot 207 , 307sw
Now cars
Picasso 2.0Hdi now gone to scrappie
Citroen zx estate 1.9D the cherished one
Peugeot 206cc raised from the dead & saved from the crusher traded up to a 308cc
307sw traded for the 207 .
Wish list.
Peugeot 405 diesel
106 or 206
Mondeo Mk1 diesel once owned 1.8tdi was real nice. - x 395
Re: My zx estate
Brake compensator valve , the estates only have them, it stops the rear brakes locking up if you have to brake very hard, like abs but not abs if that makes sence, my unit has the nylon part missing . Brakes are all good, part missing since I've had it .
Husky.
- Huskyxantia
- Donor 2023
- Posts: 1939
- Joined: 30 Jul 2018, 22:11
- Location: Surrey Kent sussex border
- My Cars: Past cars
Xsara Picasso 2019 to 2022 r.i.p
Xantia mk1&2 1.9D & 2.0Hdi
Peugeot 206 sw 1.4hdi
Other models
Skoda fabia,escort van,ford ka,Vauxhall astra g car & estate, Vauxhall corsa b, Suzuki swift
Escorts mk 1,2,3,4,5 fiestas mk 1,2, Sierra diesel mk1 Mondeo mk1 diesel .
Peugeot 207 , 307sw
Now cars
Picasso 2.0Hdi now gone to scrappie
Citroen zx estate 1.9D the cherished one
Peugeot 206cc raised from the dead & saved from the crusher traded up to a 308cc
307sw traded for the 207 .
Wish list.
Peugeot 405 diesel
106 or 206
Mondeo Mk1 diesel once owned 1.8tdi was real nice. - x 395
Re: My zx estate
I've used wd40 on mine today as it was a bit stiff and greased it on the joint , my brakes are even better now I've got to get used to braking differently again
Husky.
- CitroJim
- A very naughty boy
- Posts: 49518
- Joined: 30 Apr 2005, 23:33
- Location: Paggers
- My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
- x 6156
- Contact:
Re: My zx estate
Huskyxantia wrote: ↑22 Dec 2020, 17:31 Brake compensator valve , the estates only have them, it stops the rear brakes locking up if you have to brake very hard, like abs but not abs if that makes sence, my unit has the nylon part missing . Brakes are all good, part missing since I've had it .
Gotcha... If all your searches draw a blank might it be possible to make one from scratch? It what I would be inclined to do...
Excuse my ignorance but what is the function of the white nylon bit given it did not cause any problems at MoT time?
Jim
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
- Huskyxantia
- Donor 2023
- Posts: 1939
- Joined: 30 Jul 2018, 22:11
- Location: Surrey Kent sussex border
- My Cars: Past cars
Xsara Picasso 2019 to 2022 r.i.p
Xantia mk1&2 1.9D & 2.0Hdi
Peugeot 206 sw 1.4hdi
Other models
Skoda fabia,escort van,ford ka,Vauxhall astra g car & estate, Vauxhall corsa b, Suzuki swift
Escorts mk 1,2,3,4,5 fiestas mk 1,2, Sierra diesel mk1 Mondeo mk1 diesel .
Peugeot 207 , 307sw
Now cars
Picasso 2.0Hdi now gone to scrappie
Citroen zx estate 1.9D the cherished one
Peugeot 206cc raised from the dead & saved from the crusher traded up to a 308cc
307sw traded for the 207 .
Wish list.
Peugeot 405 diesel
106 or 206
Mondeo Mk1 diesel once owned 1.8tdi was real nice. - x 395
Re: My zx estate
It takes the slack up where the spring ends, like a spacer. The mot tester wasn't worried and said to leave it as it is , I've sprayed and greased it up and the brakes are a bit more responsive, I think his concern was it could snap if jiggled with mole grips , it didn't and the wd40 and grease did the job .
I could make a piece with a piece of pipe
I could make a piece with a piece of pipe
Husky.
-
- Donor 2023
- Posts: 2625
- Joined: 24 May 2007, 10:11
- Location: poole dorset uk
- Lexia Available: Yes
- My Cars: C5 X7 2009 2.0 HDI VF7**************[VIN obfuscated, can be read by forum staff]
C4 2010 2.0 HDi Exclusive VF7**************[VIN obfuscated, can be read by forum staff] - x 378
Re: My zx estate
You beat me to it Husky.
As it is part of the compensator valve arrangement my suggestion was going to be that it acts like a load sensing valve and without it heavy breaking unloads the rears and it has to stop the lever raising as high as rear end.
Similar, but only once have i pulled an artic trailer with the old style load sensing valve put on upside down, empty you touch the brakes and everything locked, loaded you need a runway to stop, scary but it was a good 20+ years ago
As it is part of the compensator valve arrangement my suggestion was going to be that it acts like a load sensing valve and without it heavy breaking unloads the rears and it has to stop the lever raising as high as rear end.
Similar, but only once have i pulled an artic trailer with the old style load sensing valve put on upside down, empty you touch the brakes and everything locked, loaded you need a runway to stop, scary but it was a good 20+ years ago
- white exec
- Moderating Team
- Posts: 7445
- Joined: 21 Dec 2015, 12:46
- Location: Sayalonga, Malaga, Spain
- My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S - x 1752
Re: My zx estate
I can see, I guess, that the cable pulls against the spring, and acts on the hydraulic valve. The white nylon widget obviously constitutes a spacer, but what is the function of the sticky-up part of it? What does it connect to? More white nylon covers the cable, presumably to keep the spring acting straight.
Will use your VIN (thanks) and reply here, not in the other thread.
Will use your VIN (thanks) and reply here, not in the other thread.
Chris
-
- Donor 2023
- Posts: 2625
- Joined: 24 May 2007, 10:11
- Location: poole dorset uk
- Lexia Available: Yes
- My Cars: C5 X7 2009 2.0 HDI VF7**************[VIN obfuscated, can be read by forum staff]
C4 2010 2.0 HDi Exclusive VF7**************[VIN obfuscated, can be read by forum staff] - x 378
Re: My zx estate
Chris i have had another look at the pictures, i do not have a scooby what the holes are for on the bracket but i can only assume it is there to keep it at a certain height/ angle, maybe a saftey measure incase the bracket comes loose it cannot rise higher than intended ?
- white exec
- Moderating Team
- Posts: 7445
- Joined: 21 Dec 2015, 12:46
- Location: Sayalonga, Malaga, Spain
- My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S - x 1752
- Huskyxantia
- Donor 2023
- Posts: 1939
- Joined: 30 Jul 2018, 22:11
- Location: Surrey Kent sussex border
- My Cars: Past cars
Xsara Picasso 2019 to 2022 r.i.p
Xantia mk1&2 1.9D & 2.0Hdi
Peugeot 206 sw 1.4hdi
Other models
Skoda fabia,escort van,ford ka,Vauxhall astra g car & estate, Vauxhall corsa b, Suzuki swift
Escorts mk 1,2,3,4,5 fiestas mk 1,2, Sierra diesel mk1 Mondeo mk1 diesel .
Peugeot 207 , 307sw
Now cars
Picasso 2.0Hdi now gone to scrappie
Citroen zx estate 1.9D the cherished one
Peugeot 206cc raised from the dead & saved from the crusher traded up to a 308cc
307sw traded for the 207 .
Wish list.
Peugeot 405 diesel
106 or 206
Mondeo Mk1 diesel once owned 1.8tdi was real nice. - x 395
Re: My zx estate
The part that's sticky on mine is an arm , I'll try photograph the one on my car in a few days then post it on herewhite exec wrote: ↑22 Dec 2020, 18:41 I can see, I guess, that the cable pulls against the spring, and acts on the hydraulic valve. The white nylon widget obviously constitutes a spacer, but what is the function of the sticky-up part of it? What does it connect to? More white nylon covers the cable, presumably to keep the spring acting straight.
Will use your VIN (thanks) and reply here, not in the other thread.
Husky.
- Huskyxantia
- Donor 2023
- Posts: 1939
- Joined: 30 Jul 2018, 22:11
- Location: Surrey Kent sussex border
- My Cars: Past cars
Xsara Picasso 2019 to 2022 r.i.p
Xantia mk1&2 1.9D & 2.0Hdi
Peugeot 206 sw 1.4hdi
Other models
Skoda fabia,escort van,ford ka,Vauxhall astra g car & estate, Vauxhall corsa b, Suzuki swift
Escorts mk 1,2,3,4,5 fiestas mk 1,2, Sierra diesel mk1 Mondeo mk1 diesel .
Peugeot 207 , 307sw
Now cars
Picasso 2.0Hdi now gone to scrappie
Citroen zx estate 1.9D the cherished one
Peugeot 206cc raised from the dead & saved from the crusher traded up to a 308cc
307sw traded for the 207 .
Wish list.
Peugeot 405 diesel
106 or 206
Mondeo Mk1 diesel once owned 1.8tdi was real nice. - x 395
ZX Estate outer sills.
Outer sills .
Where are they I've looked lots of places not having much luck .
Where are they I've looked lots of places not having much luck .
Husky.
- Huskyxantia
- Donor 2023
- Posts: 1939
- Joined: 30 Jul 2018, 22:11
- Location: Surrey Kent sussex border
- My Cars: Past cars
Xsara Picasso 2019 to 2022 r.i.p
Xantia mk1&2 1.9D & 2.0Hdi
Peugeot 206 sw 1.4hdi
Other models
Skoda fabia,escort van,ford ka,Vauxhall astra g car & estate, Vauxhall corsa b, Suzuki swift
Escorts mk 1,2,3,4,5 fiestas mk 1,2, Sierra diesel mk1 Mondeo mk1 diesel .
Peugeot 207 , 307sw
Now cars
Picasso 2.0Hdi now gone to scrappie
Citroen zx estate 1.9D the cherished one
Peugeot 206cc raised from the dead & saved from the crusher traded up to a 308cc
307sw traded for the 207 .
Wish list.
Peugeot 405 diesel
106 or 206
Mondeo Mk1 diesel once owned 1.8tdi was real nice. - x 395
- Huskyxantia
- Donor 2023
- Posts: 1939
- Joined: 30 Jul 2018, 22:11
- Location: Surrey Kent sussex border
- My Cars: Past cars
Xsara Picasso 2019 to 2022 r.i.p
Xantia mk1&2 1.9D & 2.0Hdi
Peugeot 206 sw 1.4hdi
Other models
Skoda fabia,escort van,ford ka,Vauxhall astra g car & estate, Vauxhall corsa b, Suzuki swift
Escorts mk 1,2,3,4,5 fiestas mk 1,2, Sierra diesel mk1 Mondeo mk1 diesel .
Peugeot 207 , 307sw
Now cars
Picasso 2.0Hdi now gone to scrappie
Citroen zx estate 1.9D the cherished one
Peugeot 206cc raised from the dead & saved from the crusher traded up to a 308cc
307sw traded for the 207 .
Wish list.
Peugeot 405 diesel
106 or 206
Mondeo Mk1 diesel once owned 1.8tdi was real nice. - x 395
Re: My zx estate
I've purchased a pair of outer sills for the zx . The vender informs me they are the size for an estate
Stay tuned
Stay tuned
Husky.
- Huskyxantia
- Donor 2023
- Posts: 1939
- Joined: 30 Jul 2018, 22:11
- Location: Surrey Kent sussex border
- My Cars: Past cars
Xsara Picasso 2019 to 2022 r.i.p
Xantia mk1&2 1.9D & 2.0Hdi
Peugeot 206 sw 1.4hdi
Other models
Skoda fabia,escort van,ford ka,Vauxhall astra g car & estate, Vauxhall corsa b, Suzuki swift
Escorts mk 1,2,3,4,5 fiestas mk 1,2, Sierra diesel mk1 Mondeo mk1 diesel .
Peugeot 207 , 307sw
Now cars
Picasso 2.0Hdi now gone to scrappie
Citroen zx estate 1.9D the cherished one
Peugeot 206cc raised from the dead & saved from the crusher traded up to a 308cc
307sw traded for the 207 .
Wish list.
Peugeot 405 diesel
106 or 206
Mondeo Mk1 diesel once owned 1.8tdi was real nice. - x 395
- Huskyxantia
- Donor 2023
- Posts: 1939
- Joined: 30 Jul 2018, 22:11
- Location: Surrey Kent sussex border
- My Cars: Past cars
Xsara Picasso 2019 to 2022 r.i.p
Xantia mk1&2 1.9D & 2.0Hdi
Peugeot 206 sw 1.4hdi
Other models
Skoda fabia,escort van,ford ka,Vauxhall astra g car & estate, Vauxhall corsa b, Suzuki swift
Escorts mk 1,2,3,4,5 fiestas mk 1,2, Sierra diesel mk1 Mondeo mk1 diesel .
Peugeot 207 , 307sw
Now cars
Picasso 2.0Hdi now gone to scrappie
Citroen zx estate 1.9D the cherished one
Peugeot 206cc raised from the dead & saved from the crusher traded up to a 308cc
307sw traded for the 207 .
Wish list.
Peugeot 405 diesel
106 or 206
Mondeo Mk1 diesel once owned 1.8tdi was real nice. - x 395
Re: My zx estate
Never got the sills . Polish seller claimed he couldnt send them due to brexit stuff, funny thing is an item from China arrived no problems at all, still money back and I'll have to try another way,
SPRAY PAINT .
Considering a total respray my issue is colour keep it the same ? Or another colour ?
SPRAY PAINT .
Considering a total respray my issue is colour keep it the same ? Or another colour ?
Husky.