Hey all
I have read through old posts as best I can and can see nothing exactly related. I'm looking for someone with the lexia/program to help me with installing cruise control on my 2013 auto 1.6 e hdi Berlingo multispace xtr airdream.
I understand the theory and what to look for with regards to pedal wiring etc. I have the hole for the cruise control and am happy to wire it in.
But I don't have the right gear/program/experience for the programming side. I was going to fork out for the programming equipment and give it a go, but I thought rather than pay an internet shop, if someone else already had the gear they could earn a few quid instead. I am in Dorset and happy to travel within reason.
Drop me a message if you can help and want a few pounds in your pocket
Cheers
Berlingo - Cruise control retro fit
Moderator: RichardW
-
- (Donor 2020)
- Posts: 5
- Joined: 20 Nov 2020, 00:12
- x 1
-
- (Donor 2020)
- Posts: 44
- Joined: 17 Oct 2020, 20:36
- x 3
Re: Berlingo - Cruise control retro fit
There should be an interactive map of Lexia owners on here somewhere. Sure I saw it a while ago.
You're probably saving yourself a very big headache by not installing it yourself - I've been going through that with the same aim in mind (but for an M59), and it ain't much fun!
I'm nowhere near Dorset either - sorry!
UPDATE: here it is!
viewtopic.php?t=56452
Shows one chap in Christchurch.
You're probably saving yourself a very big headache by not installing it yourself - I've been going through that with the same aim in mind (but for an M59), and it ain't much fun!
I'm nowhere near Dorset either - sorry!
UPDATE: here it is!
viewtopic.php?t=56452
Shows one chap in Christchurch.
-
- (Donor 2020)
- Posts: 5
- Joined: 20 Nov 2020, 00:12
- x 1
Re: Berlingo - Cruise control retro fit
You are literally a lifesaver! I went through posts for cruise control retro fit but not the programming software specifically.
Thank you so much!
Thank you so much!
-
- (Donor 2020)
- Posts: 44
- Joined: 17 Oct 2020, 20:36
- x 3
-
- (Donor 2020)
- Posts: 5
- Joined: 20 Nov 2020, 00:12
- x 1
Re: Berlingo - Cruise control retro fit
Just as an update, not sure if I was just plain lucky or someone was smiling down on me, but I plugged the stalk in and it works straight off the bat!
Very happy Berlingo owner!!
Thanks for those who PM'd/responded on here.
Cheers
Very happy Berlingo owner!!
Thanks for those who PM'd/responded on here.
Cheers
-
- Donor 2023
- Posts: 2625
- Joined: 24 May 2007, 10:11
- x 378
Re: Berlingo - Cruise control retro fit
Hi madted21
Glad you got it sorted, sorry i was a little late to the thread.
I am in Dorset and have a Lexia but not 100% sure i have the correct adaptor for the Berlingo, something tells me it is FIAT based.
Happy to help if i can
Colin
Glad you got it sorted, sorry i was a little late to the thread.
I am in Dorset and have a Lexia but not 100% sure i have the correct adaptor for the Berlingo, something tells me it is FIAT based.
Happy to help if i can
Colin
-
- Forum Admin Team
- Posts: 37601
- Joined: 15 Sep 2015, 19:38
- x 5778
Re: Berlingo - Cruise control retro fit
The Berlingo stand alone is PSA Colin - no FIAT influence on these, only some of the commercial Vans and the Nemo, Bipper which is the same as the Fiat Fiorino, so no need for an adaptor on the Berlingo for future reference.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Donor 2023
- Posts: 2625
- Joined: 24 May 2007, 10:11
- x 378
Re: Berlingo - Cruise control retro fit
Thanks Marc i remember something about an adaptor needed for a campervan conversion so just wanted to check i was not saying i could do when i could not
@madted21 PM me if you need any help not about during the week but weekends are ok usually
Colin
@madted21 PM me if you need any help not about during the week but weekends are ok usually
Colin
-
- (Donor 2020)
- Posts: 5
- Joined: 20 Nov 2020, 00:12
- x 1
Re: Berlingo - Cruise control retro fit
Hi Colin
That's really kind of you. The cruise control is in and working thanks, very pleased that it didn't require further work but it is kind of you to offer.
My next project is to install heated mirrors ha ha... hopefully that won't need software work!
Thanks again
Neil
That's really kind of you. The cruise control is in and working thanks, very pleased that it didn't require further work but it is kind of you to offer.
My next project is to install heated mirrors ha ha... hopefully that won't need software work!
Thanks again
Neil
-
- Donor 2023
- Posts: 2625
- Joined: 24 May 2007, 10:11
- x 378
Re: Berlingo - Cruise control retro fit
No problems Neil just yell if you need some help with Lexia sure we can work something out