Toolbag Tales-Homemade and improvised tools

This is the place for posts that don't fit into any other category.

Moderator: RichardW

Post Reply
User avatar
myglaren
Forum Admin Team
Posts: 25364
Joined: 02 Mar 2008, 13:30
Location: Washington
My Cars: Mazda 6
Ooops.
Previously:
2009 Honda Civic :(
C5, C5, Xantia, BX, GS, Visa.
R4, R11TXE, R14, R30TX
x 4888

Re: Toolbag Tales-Homemade and improvised tools

Post by myglaren »

I have a strap wrench that has a socket on it, as the chain wrench above - a chain wrench too, somewhere :oops:
Neither any use as access is too awkward for either.

I find this very useful, more to remove the fuel filter locking ring as the oil filters are easily removed by hand after the first oil change.
61gBih6s7WL._AC_SL1500_.jpg
Won't shift spheres of course.
Peter.N.
Moderating Team
Posts: 11563
Joined: 02 Apr 2005, 16:11
Location: Charmouth,Dorset
My Cars: Currently:

C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red

In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars.
x 1199

Re: Toolbag Tales-Homemade and improvised tools

Post by Peter.N. »

Excellent. I bought a custom made one for the Mk 1 XMs off ebay - not much good to me now, these have steel springs.

Peter
User avatar
ksanturion10
Posts: 228
Joined: 14 Oct 2018, 21:59
Location: Sofia, Bulgaria
My Cars: Xantia Estate X1 1.8i, 16v
x 19

Re: Toolbag Tales-Homemade and improvised tools

Post by ksanturion10 »

Peter.N. wrote: 29 Jun 2020, 10:23 I'm sure it will.
Yup, turned out to be right :) .
Kind of clumsy, as it is one roll chain, but just OK for the space provided (around 30 deg of a turn :shock: ).
Still, this is the best type for my engine. It seems the prices of this type has fallen sharply these days, but this was in my "to do" list since I had to puncture the old filter for the removal, so didn't kept an eye on the market.
But hey, DIY is DIY 8-)

BR
Martin
Only himself the stupid makes wrong, many are being confused by the clever :P
Gibbo2286
(Donor 2020)
Posts: 7171
Joined: 08 Jun 2011, 18:04
Location: GL15***
My Cars: 2006 C5 2.0 Litre HDI VTR Automatic Estate.(now sold on)
Currently Renault Zoe 2014 ZE
x 2500

Re: Toolbag Tales-Homemade and improvised tools

Post by Gibbo2286 »

Take a wander around my very untidy workshop. :(
Attachments
shed16.JPG
shed15.JPG
shed14.JPG
shed13.JPG
shed12.JPG
shed11.JPG
shed10.JPG
shed9.JPG
shed8.JPG
shed7.JPG
shed6.JPG
shed5.JPG
shed4.JPG
shed3.JPG
shed2.JPG
shed1.JPG
Man is, by nature, a lazy beast, he does not need twice encouraging to do nothing.
User avatar
mickthemaverick
Donor 2024
Posts: 13523
Joined: 11 May 2019, 17:56
Location: Hertford
My Cars: 70+ former cars (list available) including 11 Citroens, 3 Renaults
Current cars: 2004 Subaru Legacy 2.5 SEn, 1994 Mazda MX3
x 6011

Re: Toolbag Tales-Homemade and improvised tools

Post by mickthemaverick »

Gibbo2286 wrote: 20 Jul 2020, 10:24 Take a wander around my very untidy workshop. :(
It may not look like a professional workshop Gibbo but I bet you know where everything is!! (Or at least you used to :-D ) :) :)
I used to be indecisive, now I'm not so sure!
I used to ride on two wheels, but now I need all four!
User avatar
Paul-R
Donor 2023
Posts: 6916
Joined: 07 May 2009, 16:24
Location: Wirral, NW England; Vaucluse 84, France
Lexia Available: Yes
My Cars: 2015 1.6 Blue HDi 120 Peugeot 308 Active SW
2013 2.0 HDi 163 C5 Exclusive Tourer
2003 2.0 HDi 110 C5 Exclusive Estate (Gone)
2001 2.0 HDi 90 Xsara Estate (Gone)
x 1369

Re: Toolbag Tales-Homemade and improvised tools

Post by Paul-R »

Gibbo2286 wrote: 20 Jul 2020, 10:24Take a wander around my very untidy workshop.
Doesn't look all that untidy to me. I see plenty of plastic bins holding stuff in the right place. And it looks like you can walk from one side to the other - what more do you want?
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.

Inside every old person is a young person wondering what the hell happened.

"Trying is the first step towards failure" ~ Homer J Simpson​
User avatar
bobins
Donor 2023
Posts: 5697
Joined: 05 Jul 2012, 18:07
Location: Midhurst, West Sussex
My Cars: Kia Sportage
Mazda BT-50
Land Rover SIII SWB
V-F-R800
SL320
MX5
x 2871

Re: Toolbag Tales-Homemade and improvised tools

Post by bobins »

How many of the spanners are Whitworth ? :)
Sadly no longer a C5 owner :(
Gibbo2286
(Donor 2020)
Posts: 7171
Joined: 08 Jun 2011, 18:04
Location: GL15***
My Cars: 2006 C5 2.0 Litre HDI VTR Automatic Estate.(now sold on)
Currently Renault Zoe 2014 ZE
x 2500

Re: Toolbag Tales-Homemade and improvised tools

Post by Gibbo2286 »

Quite a few Bobins :) but there are a lot of AF BSF BA MM etc. and other home made stuff too, I think most of it will end up in a skip when I snuff it.
Man is, by nature, a lazy beast, he does not need twice encouraging to do nothing.
User avatar
bobins
Donor 2023
Posts: 5697
Joined: 05 Jul 2012, 18:07
Location: Midhurst, West Sussex
My Cars: Kia Sportage
Mazda BT-50
Land Rover SIII SWB
V-F-R800
SL320
MX5
x 2871

Re: Toolbag Tales-Homemade and improvised tools

Post by bobins »

I've got quite a few old Whitworth spanners myself. I mainly use them for weighing the toolbox down #-o
Sadly no longer a C5 owner :(
User avatar
myglaren
Forum Admin Team
Posts: 25364
Joined: 02 Mar 2008, 13:30
Location: Washington
My Cars: Mazda 6
Ooops.
Previously:
2009 Honda Civic :(
C5, C5, Xantia, BX, GS, Visa.
R4, R11TXE, R14, R30TX
x 4888

Re: Toolbag Tales-Homemade and improvised tools

Post by myglaren »

My 'workshop' isn't much better. I tidy it up and then look for something and reduce it to chaos again.
I tentatively put my new router to use today - I say new, it has been here unused for 18 months.
There was a cutter fitted so used that, couldn't find the others despite searching for an hour.

Discovered them while looking for a pencil - under the router box :(
IMGP1808.JPG
IMGP1809.JPG
IMGP1807.JPG
IMGP1806.JPG
IMGP1805.JPG
Then there is the dreaded cupboard under the stairs, the utility room, utility cupboard and the cupboards on the upstairs landing and best avoided the attic.
Peter.N.
Moderating Team
Posts: 11563
Joined: 02 Apr 2005, 16:11
Location: Charmouth,Dorset
My Cars: Currently:

C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red

In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars.
x 1199

Re: Toolbag Tales-Homemade and improvised tools

Post by Peter.N. »

Look at the socket sizes and guess when when I installed this!
DSCF2838.JPG
This is where my small tools are now, one of the best investments I made, cuts the time for some jobs by 50% - providing I have put them away!

Peter
Attachments
DSCF2839.JPG
User avatar
ksanturion10
Posts: 228
Joined: 14 Oct 2018, 21:59
Location: Sofia, Bulgaria
My Cars: Xantia Estate X1 1.8i, 16v
x 19

Re: Toolbag Tales-Homemade and improvised tools

Post by ksanturion10 »

When you bought your first citroen?
If I have the chance to arrange a workshop, it would be something like Gibbo's one - everything has its own place :)
Only himself the stupid makes wrong, many are being confused by the clever :P
Gibbo2286
(Donor 2020)
Posts: 7171
Joined: 08 Jun 2011, 18:04
Location: GL15***
My Cars: 2006 C5 2.0 Litre HDI VTR Automatic Estate.(now sold on)
Currently Renault Zoe 2014 ZE
x 2500

Re: Toolbag Tales-Homemade and improvised tools

Post by Gibbo2286 »

Pop a 5/8 AF on that empty 16mm hook Peter. :)
Man is, by nature, a lazy beast, he does not need twice encouraging to do nothing.
Peter.N.
Moderating Team
Posts: 11563
Joined: 02 Apr 2005, 16:11
Location: Charmouth,Dorset
My Cars: Currently:

C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red

In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars.
x 1199

Re: Toolbag Tales-Homemade and improvised tools

Post by Peter.N. »

You are quite correct Ksanturion, that would have been the CX in the mid 80s. I amazed that my original chalk writing is still on there!

Gibbo

You will notice that the 11/16th is missing, in the metric draw - 18mm. There are others that fit or nearly anyway, a 1/2 inch is slightly smaller than a 13mm, good for removing damaged nuts, and the 7/16 is near enough 11mm - but I'm sure you already know this.

Peter
Richard_C
(Donor 2016)
Posts: 535
Joined: 15 Oct 2011, 17:31
Location: Cambridge, England
My Cars: C4 Picasso 1.6 Blue Hdi 120 Manual Excl+ 2016
C3 1.2 Puretech 110 Auto Flair 2017
x 99

Re: Toolbag Tales-Homemade and improvised tools

Post by Richard_C »

Looking at the impressive kit in these pictures takes me back to 2CV days. You could walk out to the car and carry out a service with the starting handle/wheelbrace, a plug socket that also fitted the oil drain plug and a couple of tools that you could fit in your overalls pocket. Two ring spanners and a screwdriver if I recall. If the spanners won't fit, you are trying to unscrew the wrong thing.

My main complaint (about myself) is that all horizontal surfaces tend towards fullness. 2 medium sized work areas, one just an old kitchen worktop across 2 filing cabinets and one more substantial. But - looking for an odd bolt you get the tin out onto a bench, then the box of washers, then...then...then you need to saw or drill something and find all the useful spaces full. For speed you balance it somewhere and bodge it so you have to start again. A good tidy up is needed which you put off as long as possible - cycle repeats.

So my contribution to workshop design would be a spring-loaded absence-sensing self-tipping benchtop triggered electronically at frequent but random intervals. That would impose the discipline of 'put it away or lose it on the floor'.

I did solve the pencil problem. When I refitted the kitchen I was making up sub assemblies in the garage/workshop and then fitting them indoors. After a couple of days I realized I was wasting ages looking for a pencil, even though I had 2 or 3 in use. So I bought a box of 12, left them everywhere I was working, and after 3 weeks I still had 12. You would think that the more you have the more you lose, but no. That led me to the 1st law of the pencil: "Number of pencils mislaid is inversely proportional to the number of pencils in use".
Richard_C

Current: , C4 Picasso 120 BlueHdi, C3 1.2 Auto
Past Citroens: Dyane (x2), 2CV, Visa, BX (x2), Xantia, Xsara Picasso, C3 (x2) C5 X7 Tourer, Synergie 1.9TD, C1
Others: Hillman Hunter, Cortina Mk 1, Maxi, VW Type 2, Granada, SAAB 900, SAAB 9-5, R5 Gordini
Post Reply