Breather o ring part number please
Moderator: RichardW
-
- Posts: 158
- Joined: 09 Jul 2019, 20:33
- x 3
Breather o ring part number please
Anyone got the part number for the o ring that fits inside the breather pipe hat comes out of the rocker cover (I think). Cheers
-
- Forum Admin Team
- Posts: 37458
- Joined: 15 Sep 2015, 19:38
- x 5743
Re: Breather o ring part number please
Are you talking about the air intake manifold?
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 158
- Joined: 09 Jul 2019, 20:33
- x 3
Re: Breather o ring part number please
No Marc, it’s in the middle of the pipe with the orange flange and connects to the pcv via a white plastic connector, I’m not even sure the seal can be purchased without the whole pipe.
-
- Forum Admin Team
- Posts: 37458
- Joined: 15 Sep 2015, 19:38
- x 5743
Re: Breather o ring part number please
You've lost me - are you talking about the gas recycling circuit? If not this, then i suggest you take a picture as the PSA terminology is different to what you are using I suspect.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 158
- Joined: 09 Jul 2019, 20:33
- x 3
Re: Breather o ring part number please
O ring is on the white plastic part in the middle of this pipe.
-
- Forum Admin Team
- Posts: 37458
- Joined: 15 Sep 2015, 19:38
- x 5743
Re: Breather o ring part number please
Hallelujah
That's the air filter piping. So no 'O' rings shown on parts for these, so I think you're going to have to measure the diameter and thickness and get one independently.
That's the air filter piping. So no 'O' rings shown on parts for these, so I think you're going to have to measure the diameter and thickness and get one independently.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Forum Treasurer
- Posts: 10901
- Joined: 07 Aug 2002, 17:12
- x 1004
Re: Breather o ring part number please
Not shown separately
Should be easy enough to measure and just buy a ring the right size - alternatively, pretty sure I just wrapped a couple of turns of PTFE tape around mine when it was leaking which sorted it out...
Just as Marc said as I was typing....
Should be easy enough to measure and just buy a ring the right size - alternatively, pretty sure I just wrapped a couple of turns of PTFE tape around mine when it was leaking which sorted it out...
Just as Marc said as I was typing....
Richard W
-
- Posts: 158
- Joined: 09 Jul 2019, 20:33
- x 3
Re: Breather o ring part number please
Thanks guys, I’ll hit the plumbers merchants tomorrow.