Hi,
When I put full (or approaching full) steering lock on there is a squealing noise which I assume is the serpentine belt and sometimes the battery light comes on.
What I think is happening is that something causes the PAS pump to jam and this stops the belt from turning and hence the battery light illuminates.
Is this a known problem with the PAS pump on the Xsara and if so can the existing pump be fixed or does it need a replacement unit?
Thanks.
Approaching/Full steering lock results in illuminated battery light
Moderator: RichardW
-
- (Donor 2021)
- Posts: 338
- Joined: 24 Nov 2010, 21:35
- Location: In the garage!
- My Cars: Xsara 2.0HDi 90
- x 10
Approaching/Full steering lock results in illuminated battery light
Last edited by dave_xsara on 06 Nov 2018, 22:44, edited 1 time in total.
- white exec
- Moderating Team
- Posts: 7445
- Joined: 21 Dec 2015, 12:46
- Location: Sayalonga, Malaga, Spain
- My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S - x 1752
Re: Full steering lock results in illuminated battery light
Holding on full lock can put quite a strain on PAS pumps, and might cause belt issues, affecting the alternator.
Chris
-
- (Donor 2021)
- Posts: 338
- Joined: 24 Nov 2010, 21:35
- Location: In the garage!
- My Cars: Xsara 2.0HDi 90
- x 10
Re: Full steering lock results in illuminated battery light
It is even prior to full lock when negotiating tight spaces such as a car park. Sorry I should have been more precise in the OP.
- xantia_v6
- Forum Admin Team
- Posts: 9052
- Joined: 09 Nov 2005, 22:03
- Location: France or NewZealand
- Lexia Available: Yes
- My Cars: -
1997 Citroen Xantia V6 (France)
1999 Citroen XM V6 ES9 (France)
2011 Peugeot 308 CC THP 155 (NZ)
1975 Jaguar XJ-S pre-HE (NZ) - x 825
Re: Approaching/Full steering lock results in illuminated battery light
It sounds like a dual-mass crankshaft pulley that is de-laminating and slipping. That would be stopping all of the ancillaries working under load.
-
- (Donor 2021)
- Posts: 338
- Joined: 24 Nov 2010, 21:35
- Location: In the garage!
- My Cars: Xsara 2.0HDi 90
- x 10
Re: Approaching/Full steering lock results in illuminated battery light
Adjusted the eccentric tensioner pully and that has resolved the problem. I had bought a new spring tensioner pully, but it didn't fit so have returned it.
It's a temporary solution until the belt stretches again - I'll then get the correct spring pulley and resolve it.
I was hoping this would cure the vibration problems but that still exists. No idea what is causing it - everything seems tight.
It's a temporary solution until the belt stretches again - I'll then get the correct spring pulley and resolve it.
I was hoping this would cure the vibration problems but that still exists. No idea what is causing it - everything seems tight.
-
- Posts: 893
- Joined: 07 Oct 2005, 16:31
- Location: North Wales
- My Cars: Citroens since 1990, BX Diesel, GTI, TZD with 1.9 TD running extra boost before it was fashionable!, ZX Volcane TD, S2 Xantia break 1.9TD, Xantia HDI 110, currently zipping about in a C2 Diesel. C2 died from the dreaded worm, C3 Picasso HDI Exclusive, the adventure continues.
- x 31
Re: Approaching/Full steering lock results in illuminated battery light
Get some tippex, draw a line across the crankshaft pulley, if it moves.... mine was noisy before it ever slipped, serpentine belt tension will mess about too.
BXs since 1993 built 1.9 TZD turbo, got a S2 Xantia estate, brilliant car! 2013, Xantia HDI LX 110 2000 new car with 122,000, l C2 HDI Rusty rocket, C3 Picasso HDI new to me.
-
- (Donor 2021)
- Posts: 338
- Joined: 24 Nov 2010, 21:35
- Location: In the garage!
- My Cars: Xsara 2.0HDi 90
- x 10
Re: Approaching/Full steering lock results in illuminated battery light
Forgot to say previously to this that the pulley has been recently replaced at the same time as the belt - approx 3 - 4 months ago.
- xantia_v6
- Forum Admin Team
- Posts: 9052
- Joined: 09 Nov 2005, 22:03
- Location: France or NewZealand
- Lexia Available: Yes
- My Cars: -
1997 Citroen Xantia V6 (France)
1999 Citroen XM V6 ES9 (France)
2011 Peugeot 308 CC THP 155 (NZ)
1975 Jaguar XJ-S pre-HE (NZ) - x 825
Re: Approaching/Full steering lock results in illuminated battery light
It is still worth checking.
Did any of the symptoms above exist before the pulley was replaced?
Did any of the symptoms above exist before the pulley was replaced?