Using Lexia for C4gp 2016 towbar electrics.
Moderator: RichardW
-
- Posts: 4
- Joined: 14 Sep 2018, 20:04
- Location: Grays Essex
- My Cars: Xsara picasso 1.6hdi (dv6) 2006
Xsara hatch 2.0 diesel 2000
C4 auto hatch petrol 2005
Using Lexia for C4gp 2016 towbar electrics.
Looking for advice on using lexia to tell the car (C4gp 2016) to accept the dedicated Citroen towbar wiring loom, please forgive my ignorance but I've only done the basics so far, so I'm after finding out how to do it !! Any help greatly appreciated.
- GiveMeABreak
- Forum Admin Team
- Posts: 37444
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: Using Lexia for C4gp 2016 towbar electrics.
You should just need to go into the ‘Accessories’ menu and locate the relevant option to enable it from there. There shouldn’t be much more to it than that, assuming it is all wired in as per the instructions, fuses installed where applicable.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 4
- Joined: 14 Sep 2018, 20:04
- Location: Grays Essex
- My Cars: Xsara picasso 1.6hdi (dv6) 2006
Xsara hatch 2.0 diesel 2000
C4 auto hatch petrol 2005
Re: Using Lexia for C4gp 2016 towbar electrics.
Thanks for the quick response, I'm waiting on my new lexia software coming so fingers crossed it'll be ok !! The harness will be wired in properly as per the instruction. Thanks again
- GiveMeABreak
- Forum Admin Team
- Posts: 37444
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: Using Lexia for C4gp 2016 towbar electrics.
Some of them need a fuse installing too, but all the instructions should be with the kit if you are installing an OEM kit.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 4
- Joined: 14 Sep 2018, 20:04
- Location: Grays Essex
- My Cars: Xsara picasso 1.6hdi (dv6) 2006
Xsara hatch 2.0 diesel 2000
C4 auto hatch petrol 2005
Re: Using Lexia for C4gp 2016 towbar electrics.
The oem kit does have the 3 fuses already installed thank fully!! Just to dismantle the car and trunk the cables!!
- GiveMeABreak
- Forum Admin Team
- Posts: 37444
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: Using Lexia for C4gp 2016 towbar electrics.
Sounds a wonderful job!
Please Don't PM Me For Technical Help
Marc
Marc
-
- Forum Treasurer
- Posts: 10898
- Joined: 07 Aug 2002, 17:12
- Location: United Kingdom
- My Cars: MK2 '17 C4GP 1.6 BlueHDi 120
'13 3008 1.6 HDi GripControl - x 1003
Re: Using Lexia for C4gp 2016 towbar electrics.
I did this a couple of months ago on ours....https://www.frenchcarforum.co.uk/forum/ ... &start=495
Electrics on ours worked out the box without needing to put the Lexia on. The power connector is fixed on the side of the frame above the BSI, and there isn't much length in the wire. I had to take the glove box out to find it - and I doubt I would have been able to get it loose and plug it in even if I had been able to see it!! Check that the boot will shut (carefully, or the bumper top gets scratched...!) before you bolt all the bumper back on - there are some clips on the top that need to be engaged under the boot lip.
Electrics on ours worked out the box without needing to put the Lexia on. The power connector is fixed on the side of the frame above the BSI, and there isn't much length in the wire. I had to take the glove box out to find it - and I doubt I would have been able to get it loose and plug it in even if I had been able to see it!! Check that the boot will shut (carefully, or the bumper top gets scratched...!) before you bolt all the bumper back on - there are some clips on the top that need to be engaged under the boot lip.
Richard W
-
- Posts: 4
- Joined: 14 Sep 2018, 20:04
- Location: Grays Essex
- My Cars: Xsara picasso 1.6hdi (dv6) 2006
Xsara hatch 2.0 diesel 2000
C4 auto hatch petrol 2005
Re: Using Lexia for C4gp 2016 towbar electrics.
Thanks for that, I'll be sure to go slow and steady ! No hammers will be used lol