clicking recircirc motor on 405

caveman_si · Unread post by **caveman_si** » 06 Mar 2005, 01:30

Ive just been reminded that my car clicks. its been doing it soo long ive grown accustomed to it. But i think its time to stop it. since ive got a bit of driving coming up with some friends and i dont want to send them mad. (well any madder)
The clicking is behind the glove box (car is a 405td 1.9 1994) which ive been told is a result of the cog on the recirc motor/flap loosing teeth. I have also been told model shops stock a suitable replacement.
So my questions are 1) does it sound about right ie dodgy cog 2) anybody know where i can get said replacement cog 3) any one have a rought guide to replaceing said cog???
cheers si

tonespeed1999 · Unread post by **tonespeed1999** » 06 Mar 2005, 02:06

the price of the motor is around £65-70 from peugeot.i would say hunt around some scrap yard,plenty to pick at!!

Mosser · Unread post by **Mosser** » 06 Mar 2005, 02:30

Its probably the same part on the 406 if you can find one for that, as my 98 s reg 406 had exactly the same problem!, i was happy to let it click as i had got used to it and didnt notice it, but it used to drive passengers nuts !!

tonespeed1999 · Unread post by **tonespeed1999** » 06 Mar 2005, 15:20

the last one i did,i turned the flap to the desired setting and then disconnected the plug,as customer couldnt afford the part at that time!

PowerLee · Unread post by **PowerLee** » 06 Mar 2005, 16:58

Hi
Heres some pretty pictures of the cuprit
http://img.photobucket.com/albums/v201/ ... eMotor.jpg
http://img.photobucket.com/albums/v201/ ... Inside.jpg
http://img.photobucket.com/albums/v201/ ... gyGear.jpg
I have heard some people have repaired these motors using radio control car gears from a model shop.

Mosser · Unread post by **Mosser** » 06 Mar 2005, 18:15

Interesting, i am into radio controlled helicopters and planes and those gears look exactly the same as futaba 148 servo gears, the whole servo is only about £8 and a replacement gear set is about £3 is you can get them, easier to just buy a complete servo

PowerLee · Unread post by **PowerLee** » 06 Mar 2005, 18:17

£3 sounds a lot cheaper then Peugeots £80 ish they want for a whole motor