Xantia Driveshaft query Jon?

oilyspanner · Unread post by **oilyspanner** » 15 Feb 2005, 19:27

Just been attempting to purchase an intermediate driveshaft bearing for 1996 Xant TD VSX, sons of fue at local cit agents need chassis no??? Cannot find this part in Andyspares catalogue, do you carry it Jon?
Stewart[}:)]

jeremy · Unread post by **jeremy** » 15 Feb 2005, 20:09

If you can get it off you can probably get a bearing from an industrial bearing supply shop. I think the question is getting it off in the first place.
http://www.citroenz.com/forum/viewtopic.php?t=1299
Jeremy

Unread post by **Jon** » 15 Feb 2005, 20:40

GSF N43890 is the correct bearing (if you can get the old one off!) Thats Citroen 324703.

AndersDK · Unread post by **AndersDK** » 15 Feb 2005, 21:53

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Jon</i>

GSF N43890 is the correct bearing (if you can get the old one off!) Thats Citroen 324703.
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
... which is the type 6006 bearing used on most RHS driveaxles.
Comes withOUT the lockring !

oilyspanner · Unread post by **oilyspanner** » 15 Feb 2005, 21:59

Thanks chaps, am i right in thinking that the lock ring goes on to the shaft from the diff end of the shaft after the bearing? in which case what is to stop me from removing the inner joint, cutting the old bearing off and installing the new bearing from the outboard end of the shaft, just a thought, I have removed lots of the shafts but never replaced this bearing.
Stewart

AndersDK · Unread post by **AndersDK** » 15 Feb 2005, 22:06

How would you remove the inner joint ?
This is welded or crimped on the axle !
You would no doubt damage a few things down there trying that [;)]

oilyspanner · Unread post by **oilyspanner** » 15 Feb 2005, 22:17

The rotor on the ones I have oops looking at it from the wrong end, sorry folks, have flu, now delerious.......
Stewart