Hi,
Can someone please let me know the factory Sphere markings on a 05 C5II 3.0 V6? I think it is time to replace my spheres and that I think non-proper ones were installed onto my vehicle.
Thank you.
Factory Sphere markings on a 05 C5 II 3.0 V6 Petro
-
AlvinCitroenC5
- Posts: 110
- Joined: 16 Apr 2017, 00:10
- x 3
-
GiveMeABreak
- (Donor 2016)
- Posts: 42019
- Joined: 15 Sep 2015, 19:38
- x 6955
Re: Factory Sphere markings on a 05 C5 II 3.0 V6 Petro
I'm just going back over some unanswered posts Alvin and spotted this.
For your car, the front corner suspension spheres are part number: 5271 H7. They are 385 CM3 and are 52 Bar. The 385 CM3 refers to the cylinder volume.
The rear corner spheres are part number: 5272 77. These are 385 CM3 and are 25 Bar.
Your front 'Rigidity' regulator sphere is part no: 5276 21. 385 CM3 and 62 Bar.
Your rear 'Rigidity' regulator sphere is part no: 5272 66. 385 CM3 and 44 Bar.
For your car, the front corner suspension spheres are part number: 5271 H7. They are 385 CM3 and are 52 Bar. The 385 CM3 refers to the cylinder volume.
The rear corner spheres are part number: 5272 77. These are 385 CM3 and are 25 Bar.
Your front 'Rigidity' regulator sphere is part no: 5276 21. 385 CM3 and 62 Bar.
Your rear 'Rigidity' regulator sphere is part no: 5272 66. 385 CM3 and 44 Bar.
Please note, I'm no longer active on the Forum, so won't respond to messages.
Marc
Marc
-
AlvinCitroenC5
- Posts: 110
- Joined: 16 Apr 2017, 00:10
- x 3
Re: Factory Sphere markings on a 05 C5 II 3.0 V6 Petro
Marc,
Thank you.
Thank you.