Synergie clutch judder, now clutch wont disengage.

This is the Forum for all your Citroen Technical Questions, Problems or Advice.
Ianhw77k
Posts: 123
Joined: 01 Apr 2014, 19:38

Re: Synergie clutch judder, now clutch wont disengage.

Unread post by Ianhw77k »

RichardW wrote:service.citroen shows:


0127 28

01
CRANKSHAFT BEARING SEAL
90X110-7
SFCM -
This is the oil seal I've been sent. Haven't got the flywheel off yet to see if it's the same or not.

Image
1995 Citroen Synergie 1.9TD (Mine)
2001 Citroen Xsara Picasso 2.0HDI (The wife's)
RichardW
Forum Treasurer
Posts: 12447
Joined: 07 Aug 2002, 17:12
x 1434

Re: Synergie clutch judder, now clutch wont disengage.

Unread post by RichardW »

Might be a bit thick as that one is 10mm rather than 7 speciified....
Richard W
Ianhw77k
Posts: 123
Joined: 01 Apr 2014, 19:38

Re: Synergie clutch judder, now clutch wont disengage.

Unread post by Ianhw77k »

Just my luck if it's another wrong part.
At least this one was local.
1995 Citroen Synergie 1.9TD (Mine)
2001 Citroen Xsara Picasso 2.0HDI (The wife's)
Ianhw77k
Posts: 123
Joined: 01 Apr 2014, 19:38

Re: Synergie clutch judder, now clutch wont disengage.

Unread post by Ianhw77k »

Yep, wrong part. Story of my life!

Right part ordered, should be in Monday. I'm tempted to see if the thicker one will work but that just sounds too much like tempting fate.
1995 Citroen Synergie 1.9TD (Mine)
2001 Citroen Xsara Picasso 2.0HDI (The wife's)