Engine bay cleaning advice please

This is the place for posts that don't fit into any other category.

Moderator: RichardW

Post Reply
BenC5HDi
Not Mike
Posts: 588
Joined: 30 Nov 2015, 20:21
Location: Around Berkshire
My Cars: '07 Peugeot 207 1.4 "Sport" (Ha!)
'04 Berlingo Multispace 2.0 HDi with a 123BHP remap
x 45

Engine bay cleaning advice please

Post by BenC5HDi »

Now, cleaning engine bays is a somewhat alien concept to me. However, my brother has a hydro-dipping business and has redone all my underbonnet plastics and covers in a nice carbon weave black. It looks very smart, but it's let down by the filthyness of the rest of the engine bay and he'd like to have some pictures of it all nice and shiny for his portfolio of work..

So, what can I use to clean it with? Obviously I'm not going to jet wash it or anything extreme. I'd rather not use anything too toxic and it's strictly a one - off clean so I'm not going to go and spend loads on cleaning stuff...

It's a Berlingo 2.0 HDi if it makes any difference..

Thanks!

Sent from my SM-N9005 using Tapatalk
User avatar
daviemck2006
(Donor 2020)
Posts: 4989
Joined: 04 Dec 2010, 18:45
Location: Macduff
My Cars: Far too many good ones to remember. Many BL, Vauxhall, Ford, Renault, Citroen, Peugeot, and now VAG
x 487

Re: Engine bay cleaning advice please

Post by daviemck2006 »

My advice is pay someone else to do it! You may think I don't like cleaning engine bays either and you would be correct. It's something I have never done!
Skoda Karoq 1.6tdi 2018
Citroen relay camper 2012
In the family
Seat Leon 1.5tsi tourer 2019 daughter 1
C1 vtr+ 2010 daughter 2
bxzx16v
Posts: 1696
Joined: 29 May 2011, 22:11
Location: Sheffield
My Cars: Past Frenchies , 4xBx16v,1xBxGti,1xBxTzd,2xZx Volcanes,1xZx reflex,1xPug 405mi16, 3x Xantia 1.9td's,1x Xantia activa, 2x Renault 25 V6 turbo, 1 Zx16v ,1 Pug 406 V6 coupe ,1x C8 , 1x Berlingo van , 1x Xanti 2.1td , 1x Renault Laguna 3
x 35

Re: Engine bay cleaning advice please

Post by bxzx16v »

Bilt Hambers surfex Hd will work a treat on engine bay cleaning Ben , it can be diluted to whatever strength you require . It's probably one of the best all purpose cleaners around .I'm sure it's a available in a 1 ltr spray and a 5ltr container too .

Mark
2009 Landrover Freelander 2 TD4se (killed an Audi) , sadly now gone .
2012 Landrover Freelander 2 SD4 AUTO Love it . Now gone .
2014 Ford Bmax 1.0 Ecoboost Zetec . Fantastic little machine .Gone now.
2014 Ford Focus 2.0 Tdci Zetec S with the French heart.
Gibbo2286
(Donor 2020)
Posts: 7171
Joined: 08 Jun 2011, 18:04
Location: GL15***
My Cars: 2006 C5 2.0 Litre HDI VTR Automatic Estate.(now sold on)
Currently Renault Zoe 2014 ZE
x 2500

Re: Engine bay cleaning advice please

Post by Gibbo2286 »

Simple, paraffin a paint brush and some paper tissue.
Man is, by nature, a lazy beast, he does not need twice encouraging to do nothing.
User avatar
Stickyfinger
(Donor 2016)
Posts: 10411
Joined: 28 Mar 2013, 21:05
Location: Somset my lovleee
My Cars: Xantia V6 ACTIVA 3ltr 24v Manual p1
Xm 2.1TD Ph2 Exclusive
AX, little Daffodil
SAXO White Mk1. Sally
x 1280
Contact:

Re: Engine bay cleaning advice please

Post by Stickyfinger »

Strip off as much as you can, then starting as far down as you can do the deepest areas and work up. Wooden coffee mixers are great (steal and handful from McDonalds) as they can be used to scrap crud away and be wrapped with some rag. Other long thin wooden sticks with gaffer taped rag gets into deep areas.

A good few small paint brushes (cheepos from B&Q etc) ....cut some down for "scrubbing" and tape to a long stick, thin long ally rod, bent at 45deg and a brush taped on gets into hard to reach areas.

inspection gloves AND some thicker thin "gardening" gloves over the top....prevents damaging your hands and ripping endless thin blue ones.

Gunk (or similar) in large tins decanted into a small spray bottle (that gives a jet)

Never been one for jet washing
Alasdair
Activa, the Moose Rider
3x C5x7 Steering racks and counting
Gibbo2286
(Donor 2020)
Posts: 7171
Joined: 08 Jun 2011, 18:04
Location: GL15***
My Cars: 2006 C5 2.0 Litre HDI VTR Automatic Estate.(now sold on)
Currently Renault Zoe 2014 ZE
x 2500

Re: Engine bay cleaning advice please

Post by Gibbo2286 »

One of my trade friends has a Berlingo standing on his yard for about five years now, he took it px as a non runner after the guy who owned it pressure washed everything, under the bonnet inside the cab and all.

All attempts to get it going including bsi immobilisers etc. failed, and it was put aside and forgotten, I think he recently nicked the head off it for another van and no doubt other bits and pieces have been taken by the cannibals.
Man is, by nature, a lazy beast, he does not need twice encouraging to do nothing.
User avatar
white exec
Moderating Team
Posts: 7445
Joined: 21 Dec 2015, 12:46
Location: Sayalonga, Malaga, Spain
My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S
x 1752

Re: Engine bay cleaning advice please

Post by white exec »

If you've never tried it, any brand of biological (enzyme) clothes washing liquid, in warm water, cuts through oil, grease, grime and crud. Also cleans up paint brushes which have been used in solvent/oil-based paints, including Hammerite - just use a tiny amount of the relevant solvent first.

Well-kept secret.
Chris
Peter.N.
Moderating Team
Posts: 11563
Joined: 02 Apr 2005, 16:11
Location: Charmouth,Dorset
My Cars: Currently:

C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red

In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars.
x 1199

Re: Engine bay cleaning advice please

Post by Peter.N. »

Back in the '50s they used a good old fashioned steam cleaner - worked a treat, probably banned by health and safety now.

Peter
User avatar
Zelandeth
Donor 2024
Posts: 4731
Joined: 16 Nov 2014, 23:36
Location: Milton Keynes
My Cars: 2006 Peugeot Partner Escapade 1.6HDi.
1988 Renault 25 Monaco 2.0i.
1985 Sinclair C5.
1984 Trabant 601S.
1975 Rover 3500.
1973 AC Model-70.
x 1403
Contact:

Re: Engine bay cleaning advice please

Post by Zelandeth »

Have to confess to having pressure washed engine bays of everything from Austin Metros to Ladas to the 107 and my current Xantia. Just use a bit of common sense, scope out where the ECU(s) are and avoid them, and don't go out of the way to direct a jet at close range at electrical connectors - from a decent range though you should be fine. Obviously stick a plastic bag over the air intake as well.

Only car that has ever protested was an L plate Fiesta - though all this proved to me was that it needed new HT leads - and even then a squirt of WD40 had it right as rain.

If you blast everything from an inch away though mind you, then yes you will be letting yourself in for a world of pain. Bit of care though and you'll be fine. If you have a washer that can do hot water too like the one we had at the garage it can be astonishingly effective.
Current fleet:
06 Peugeot Partner Escapade 1.6HDi, 88 Renault 25 Monaco, 85 Sinclair C5, 84 Trabant 601S, 75 Rover 3500, 73 AC Model 70.
User avatar
van ordinaire
(Donor 2017)
Posts: 2537
Joined: 23 Jun 2015, 14:45
Location: Live & work in London but weekend in Devon (or do I now live in Torbay & work in London?)
My Cars: Citroens:-
'81 2CV Club (quietly sleeping in a parallel universe)
'05 (yes, really) C15
'97 Xantia Exclusive estate
others:-
'96 Jeep Cherokee Limited - the "donor"
'99 Jeep Cherokee Orvis - the green one
'97 Jeep Cherokee Limited - the red one
'99 Cadillac Seville STS
'96 Cadillac Eldorado ETC
& numerous what might be described as abandoned projects!
x 405

Re: Engine bay cleaning advice please

Post by van ordinaire »

white exec wrote:If you've never tried it, any brand of biological (enzyme) clothes washing liquid, in warm water, cuts through oil, grease, grime and crud. Also cleans up paint brushes which have been used in solvent/oil-based paints, including Hammerite - just use a tiny amount of the relevant solvent first.

Well-kept secret.
Really? I haven't found a laundry product that will get grease (all right, cooking oil) out of clothes!
Citroens:-
'81 2CV Club :cry:
'05 C15 :!:
'97 Xantia Exclusive estate [-o<
others:-
Jeep XJ Cherokees x 3 :?
'96 Cadillac Eldorado
'99 Cadillac STS :|
& the numerous "abandoned projects" #-o
User avatar
white exec
Moderating Team
Posts: 7445
Joined: 21 Dec 2015, 12:46
Location: Sayalonga, Malaga, Spain
My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S
x 1752

Re: Engine bay cleaning advice please

Post by white exec »

Yes, it does work.
Paintbrush used for Hammerite or solvent-based paint just needs a good agitate in tiny quantity of solvent first. Then a hefty squirt of bio liquid in a jar, work about with brush, then add some warm water. Do second time to get an absolutely clean brush.
Dirty/oily engine parts will clean up with bio and water in a workshop sink.
Ditto paint-spray and wax-injection guns, after small amount of solvent first.
Doesn't eliminate the need for appropriate solvent altogether, but reduces need for it by huge amount.
Grease stains in woven material can be very difficult to shift if they have actually dyed the material. For these, try liquid Vanish or Vanish soap-bar, before a wash.

Bio liquid contains grease/oil/dirt-dissolving enzymes. These only become active when water is added to the supplied liquid, and have a life of about a day. This means that neat (undiluted) bio liquid will not have much effect on dirt, until water is added. Diluted bio liquid kept standing around for much longer than this will lose its rapid grease-dissolving ability. Not normally a consideration.
Chris
Post Reply