Part info request please!

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

BenC5HDi
Not Mike
Posts: 588
Joined: 30 Nov 2015, 20:21
x 45

Part info request please!

Post by BenC5HDi »

Hi all,

please could one of you kind chaps tell me if there is a "piece of loom" from the seatbelt pre-tensioner electrical connector under the driver's seat, to the airbag ECU (centre console, behind gearlever, I believe) in a 2004 Berlingo Multipsace HDi?

The VIN is VF7**************[VIN obfuscated, can be read by forum staff] 93184623

I'm getting a "right hand side pre-tensioner open circuit" on Lexia. I've disconnected the pre-tensioner and stuck a 2ohm resistor on the end of the wires. This should make the airbag light go out if the pre-tensioner is faulty. Airbag light stayed on, so it must be the wiring to the airbag ECU. If a piece is available simply to replace the lot, I'd like to know before I take the seat out..

thanks!
Ben
User avatar
GiveMeABreak
Forum Admin Team
Posts: 37458
Joined: 15 Sep 2015, 19:38
x 5743

Re: Part info request please!

Post by GiveMeABreak »

Ben - As we can't look up VIN codes on the electrical database, we have to manually select the options - I have worked out all the other stuff from the info returned on the service Docs - but still need one more piece of info. Which of the following is your vehicle:
Type 8 H1 Long Van
Long Panel Van H1 Type 12
Family Light Van
Short Van '475'
Short Van '500'
Short Van '600.
Short Van '800'
Type 8 Platform Cab?
Please Don't PM Me For Technical Help

Marc
BenC5HDi
Not Mike
Posts: 588
Joined: 30 Nov 2015, 20:21
x 45

Re: Part info request please!

Post by BenC5HDi »

Hell, I've no idea. I'd imagine Family Light Van. I'd think the cable from the airbag ECU to where it joins under the seat to the cable from the pretensioner would be the same on them all anyway, as it's the same airbag ECU on all of them.

Sent from my SM-N9005 using Tapatalk
User avatar
GiveMeABreak
Forum Admin Team
Posts: 37458
Joined: 15 Sep 2015, 19:38
x 5743

Re: Part info request please!

Post by GiveMeABreak »

Can you send me a PM with an email address - I've got the wiring diagrams with the harnesses shown - it looks like it's all one piece from these - but better if you check as you have the eyes on it.
Please Don't PM Me For Technical Help

Marc
User avatar
GiveMeABreak
Forum Admin Team
Posts: 37458
Joined: 15 Sep 2015, 19:38
x 5743

Re: Part info request please!

Post by GiveMeABreak »

Ben - I've got the PDFs ready for you, but calling it a night, as haven't heard from you. Let me know if you want them tomorrow.
Please Don't PM Me For Technical Help

Marc
BenC5HDi
Not Mike
Posts: 588
Joined: 30 Nov 2015, 20:21
x 45

Re: Part info request please!

Post by BenC5HDi »

Hello Marc, I thought I'd sent you a pm... I'll try again now, many thanks..

Sent from my SM-N9005 using Tapatalk
User avatar
GiveMeABreak
Forum Admin Team
Posts: 37458
Joined: 15 Sep 2015, 19:38
x 5743

Re: Part info request please!

Post by GiveMeABreak »

Wiring connector located - just sent part info through now Ben.., :wink:
Please Don't PM Me For Technical Help

Marc
BenC5HDi
Not Mike
Posts: 588
Joined: 30 Nov 2015, 20:21
x 45

Re: Part info request please!

Post by BenC5HDi »

Wonderful, many thanks for your help. Much appreciated Marc!