I would like to ask help in case of installing a new keyless remote entry into a 1999 Xsara I but I am faceing with a problem of wiring.
According to the guide information there are 5 diff. kind of wires what should be connected to the original built-in central lock. ( I did not buy the motors)
So there are the following wires:
Green and blue – Negative and positive power supply (reversed polarity)
Brown and white – Signal for the motors (reversed polarity)
Black – ground.
I enclosed a picture about the unit. (Sorry for the lang., I did not find in english). You can see the wiring, schematic.
I also enclosed the wiring of the central system.
What I know is I have to connect the black wire to the 4th point of the 191 unit in the picture, but where should I connect the others? 191 unit is the driver side lock.
According to the wiring there are the following pinouts of the driver side lock:
2,7,4,6,5,9,1,3.
2+7 is power supply for the motor. I think there is no need to add wire from the keyless unit.
4 is the ground. I have to add the black wire.
So I have 6,5,9,1,3 point now. What colors should be connected to these points?
I would be glad if someone could help me. I can not find any "how to" information by days.
Picture of the central lock wiring
Picture of the bought keyless remote unit
Thank you in advance.
